SP-Cycle M06 build thread

[apctjb]

How does cable routing work if I use a standard stem and handle bar rather than a single piece handlebar/stem combination? Are there other openings in the frame for the cables or only through an integrated bar/stem headset?

[Ludo]

No opening but the frame come with headset cover meant to be used with regular stem, the cover has 3 holes in it to run you cabling through it

[apctjb]

No opening but the frame come with headset cover meant to be used with regular stem, the cover has 3 holes in it to run you cabling through it

Thank you

[apctjb]

Ludo; Do you have a contact (email) of someone at Yuan An wheels? I have sent them inquiries via their website but getting no replies.  Are you still happy with the wheels you got from them. Thanks

[Ludo]

It has been posted by a couple of guys these last few days that they don’t do direct to customer anymore. Get from elite wheels or covet (their new brand apparently) on AliExpress. Some good coupons right now.

[apctjb]

t has been posted by a couple of guys these last few days that they don’t do direct to customer anymore. Get from elite wheels or covet (their new brand apparently) on AliExpress.

Thanks, I reached out to Elite Wheels. Could not find 33mm wide 29er wheels at <1300g online (1500g was the lightest) but hoping can find some 1280g wheels like you did.

[Matter]

Thanks, I reached out to Elite Wheels. Could not find 33mm wide 29er wheels at <1300g online (1500g was the lightest) but hoping can find some 1280g wheels like you did.

https://www.aliexpress.com/item/1005008570250403.html
The mountain wave wheel set 29er32mm inner width weighs about 1300g. You can also replace the regular rims. AliExpress will start the anniversary promotion today, and the price will be discounted

[apctjb]

Took advantage of the Ali express sales and grabbed some Airwolf 35mm x 20m DT240 Xray spokes 1200g wheels. So the build weight on paper is looking ~ 8.8kg. Thanks for all the suggestions.


Frame   SPCycle SP-M06   1050
Wheels   Airwolf 35mm x 20m DT240 Xray spokes   1200
RockShox Sid Ultimate - 29" x 120mm      1500
Crankset: Shimano XT M8100 -  30T / 170mm      2600
Bottom Bracket: Shimano MT800 Press-fit      -
Cassette: Shimano XT M8100 10/51T - 12 speed      -
Chain: Shimano XT M8100 - 12 Speed - 114 Links      -
Rear Derailleur: Shimano XT M8100 - 12 Speed      -
Gear Lever: Shimano XT M8100 I-Spec EV mount      -
Disc Brakes: Shimano XT M8100 centrelock front (80mm) & rear (600mm)      -
MT800 Rotors  180mm Front - 160mm Rear      -
Toseek 740mm carbon handlebar      180
Stem      100
Handlebar grips      100
Dropper post 130mm, 400mm      500
Titanium pedals      238
Specialized S-Works Fast Trak T5/T7 (29" x 2.35")      1200
Saddle      150
Waterbottle cage      16

[Hemacher]

Hey,
I received my frame last week an Build the Bike.
After I installed the drivetrain I saw that the wheel is not in the center.
Are anybody with the same issue?
I checked several times and install and reinstall, checked with another wheelset but same result.
Attached a few pictures because they say more than words...

[bordev]

 Anybody have experience with the SHIMANO Deore XT FC-M8120 crankset? Does it help to achieve a 55mm chain line and get a XT group to run smoothly on this frame?