Speeder Cycling SC-R55D

[casper.f]

SC-R55D Quickpro differences:
-Different seatstays (lower in quickpro and different joint)
-Speeder has slightly deeper downtube
-Different head tube shape
-Different seat tube/seat post

Its a long shot buddy

[getmekd]

Just had a first ride outside, frame seems good, much more comfortable than my previous bike, although it could also be the wheels and tires, since 28mm tires when inflated are 30mm because of the 24mm internal width

Issues i had building the bike.
The front thru axle was too long, so when i tighten it all the way the wheel was wobbly, so i put a 2mm spacer for now until i get new axle.
Brake mounts are faced but when i mounted the calipers i couldnt get discs not to rub in any position, i guess they are not parallel to the disc, i guess rubbing will stop after i use them for a bit, but i will go get the mounts faced.

Weight without the clip on aero bars is 7.4kg(pedals, bottle cages, garmin mount included)

https://ibb.co/vHPnqK2

[BeR]

Just had a first ride outside, frame seems good, much more comfortable than my previous bike, although it could also be the wheels and tires, since 28mm tires when inflated are 30mm because of the 24mm internal width

Issues i had building the bike.
The front thru axle was too long, so when i tighten it all the way the wheel was wobbly, so i put a 2mm spacer for now until i get new axle.
Brake mounts are faced but when i mounted the calipers i couldnt get discs not to rub in any position, i guess they are not parallel to the disc, i guess rubbing will stop after i use them for a bit, but i will go get the mounts faced.

Weight without the clip on aero bars is 7.4kg(pedals, bottle cages, garmin mount included)

https://ibb.co/vHPnqK2

What are he handlebar and aerobar ?

[DavidG]

Got my frame size 51

Took about a month for it to be shipped and 20 days for shipping, eu tax prepaid

On first look everything seems good, mounts are faced, no rough bearing seats, bb is faced and inside seems smooth
Only the headtube to downtube juction has something yellow? on the inside of the frame not sure what that is, everything else is smooth.

Was expecting the frame to be a bit lighter but its not too bad.

Weights:
Frame with rear and front derailleur hanger and bottlecage bolts: 930g
Fork uncut: 397g
Seatpost(0mm offset) with saddle clamp: 178g

Thru axles: 73g
UDH: 28g

Will post after i build the bike, still waiting for farsports hypers to be shipped.

A bit of an oversight on my part, deda super box stem only allows 2 brake cables and 1 di2 cable, i had in mind to run 2 cables to the junction in downtube and then to battery, will probably file the stem a bit to make space for 2 di2 cables, should be fine i guess?

https://ibb.co/yRJz8M4
https://ibb.co/7VDmsrB
https://ibb.co/Wk675V0
https://ibb.co/kSf590T
https://ibb.co/ZfK36HV
https://ibb.co/dkmtn1v
https://ibb.co/SyRKsmW
https://ibb.co/sJjZ3Y4

How.much did it work out with the pre-tax clearance to EU?
Is this the standard or light version of the frame? Not sure if they actually offer the two yet.

[getmekd]

What are he handlebar and aerobar ?

Handlebars DEDA Superzero RS Carbon 40cm with deda superbox stem
Aerobars are deda parabolica due, but i will probably replace them with zipp vuka since i cant move them outboard more than this and i dont like the look of them

[getmekd]

How.much did it work out with the pre-tax clearance to EU?
Is this the standard or light version of the frame? Not sure if they actually offer the two yet.

I think theres no more light and standard version, they only sell one.
Frame with thru axle, spare hanger was 900usd tax and paypal fee included
I also got clamp for carbon saddle, but its not needed for 0mm offset seatpost, its only used for 15mm offset