Chinese Carbon MTB Forums
News:
Happy Holidays!
See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
|
Re: Tideace 2022 New Enduro Mold FS838 Being Production
Geometry chart? Leverage curves? Water bottle mounts like on Norco Range? Norco uses a different rocker link for each of the frame sizes. Have haideli adressed this in any way? February 16, 2022, 09:54:42 AM |
1 |
Re: Tideace 2022 FS-AM831 Groupbuy C order with new Triangle
Im interested in a frame like this but as I remember there were countless problems with these frames beyond the flex issues including problems with hardware and frame bearings so Im still not sure... Good choice. Think about it this way. If it was selling he wouldn’t be here trying to get people to buy it with a discount. February 18, 2022, 08:32:30 PM |
1 |
|
Re: Lexon GFX Carbon Gravel Bike Frame Build
Nothing in this fork inspires confidence. The hole drilled, the overall appearance really looks amateur job... 
February 19, 2022, 07:05:30 AM |
1 |
|
Re: Tideace 2022 FS-AM831 Groupbuy C order with new Triangle
I would not risk buying this after all eddies lies here previously.
February 19, 2022, 09:57:57 AM |
1 |
Re: Tideace 2022 FS-AM831 Groupbuy C order with new Triangle
Of course, if you got any quality issue, feel free to contact me via email. I have. You ignore any emails mentioning a warranty issue I send to you even after I provided proof. You said you need to talk to “engineers” and didn’t respond for 3 weeks. Then instead of replacing the damaged frame due to factory defects, you said you will give me a discount on the new rear triangle but with your “discount” and shipping I will be paying more than another member here who purchased at full price and paid shipping when it was more expensive. It comes out to $260 total with no paint. I checked and the other member stated they paid 270, with paint. Also please stop acting like there was no issue. Otherwise you wouldn’t develop a new rear triangle. Moulds and production cost money and you are clearly very money hungry , so I doubt you would waste it on a new rear triangle if it wasn’t needed. The rear seat stays flex and the bearing has too much movement connecting the rear triangle to the upper link. If you want to keep pretending like nothing was wrong , feel free to read through the last half of this thread to learn more about it. I’m sure you will also come across the comments of people who you told would be receiving a frame with updated new rear triangle but didn’t https://chinertown.com/index.php/topic,3172.0.html Or here https://chinertown.com/index.php/topic,3539.0.html Just in case you miss it I attached a picture of a comment by someone who was injured and broke their bone because of the issue Thanks, Snacks February 21, 2022, 09:03:28 AM |
1 |
Re: Lexon GFX Carbon Gravel Bike Frame Build
I think that’s the right fork but you need a different sized bearing. Whether you want to use that fork is up to you. I doubt you’ll get a refund unless there is visible damage to the fork. It has many small cracks, fissures, poor joins, creases, bad scoring from what looks like a power sander being used, and that messy hole for the cables. I'd call that damage. Also I pinged Gavin at TopCarbon with this thread. He said he'd look into it. Hopefully they take it seriously. February 22, 2022, 05:09:18 AM |
1 |
Re: Lexon GFX Carbon Gravel Bike Frame Build
I'm currently in the refund process, via message they are saying to cancel the dispute and the will send "at once", but wont tell me what that means. I feel if I cancel it, I lose any type of leverage and they will just screw me over... They did say I could return it, but I'm sure I have to ship it back... right? Gavin at TopCarbon said he has asked the retailer to "handle it well ASAP" and will look into the issues that caused this to arise - hopefully he will. February 22, 2022, 07:07:26 AM |
1 |
|
Re: Fovno Crank sets
Finally we've got Fovno Phantom Pro Crankset (http://www.fovno.com/product/cranksets/phantom-pro-crankset%ef%bc%8829mm-spindle%ef%bc%89/) on Aliexpress: https://aliexpress.ru/item/1005003003956669.html It's DUB compatible and probably wouldn't have problems with alu bolts (as almost all other Fovno's cranks with 24mm spindle) February 24, 2022, 02:47:16 AM |
1 |
|
Re: Fake eeBrakes G4
I read 'assembled' in US like 'yes we buy them from China but it's none of your business'. 1 leaf spring + 2 circlips is rocket science now, therefore they demand premiums, lol. February 24, 2022, 04:06:05 PM |
1 |
|
Re: Tideace 2022 FS-AM831 Groupbuy C order with new Triangle
Hmmm, should we send out a search party? Someone seems to have gone MIA again.
February 24, 2022, 09:57:58 PM |
1 |