Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - PeterXu

Pages: 1 ... 5 6 [7] 8
91
29er / Re: CS-041
« on: May 26, 2015, 05:31:17 AM »
Here are some pictures of CS-041 in 17''.  there is no connecting braze between top tube and seat tube
The pictures shows a connection bridge between the top and seat tube. Do you have real pictures of a 17"version without ?

Sorry, I meant 15'' frame, not 17''

92
29er / Re: IP-036 Build
« on: May 26, 2015, 03:06:49 AM »
Actually Sapim CX-Delta spokes are almost same weight and stiff as Sapim CX-Ray but a little cheaper than CX-Ray, that is why we usually use CX-Delta to assemble wheels.

Here are 2 pictures I took during Shanghai Bicycle Show

93
29er / Re: CS-041
« on: May 25, 2015, 11:55:17 PM »
I am also interested.  Is the price comparable to the 256? Do you know of BB30 will be available?

Yes, comparable to 256 SL frame, sorry, only BB92 option

94
29er / Re: CS-041
« on: May 25, 2015, 11:54:30 PM »
Just when I had my mind made up on the 057 they go and release a new frame. Peter have these been produced yet or would there be an extended wait time?

Sizes 15''/17'' will be available in 10 days, size 19'' will be available in 25 days.

95
29er / Re: CS-041
« on: May 23, 2015, 11:52:30 PM »
Here are some pictures of CS-041 in 17''.  there is no connecting braze between top tube and seat tube on 15'' frames

96
29er / Re: John's IP-057 build - first bike build ever
« on: April 22, 2015, 10:49:27 PM »
Hi John, so sorry about this. Could you send me some pictures to me ?  petercycles@foxmail.com

THis is the second SP5 seat post that is not standard size 31.6mm, or close to 31.6mm. I know you bought this one from me when I was at Iplay, that is OK. I can send you replacement and chainstay protector from my own new company Carbon Speed.

I hope you could send me some pictures and I will pass them to our factory, I have to require them to check out the diameter carefully before giving seat posts to me.

97
Peter,

What's the word on a 56cm frame in this design, and is there a zero setback seatpost available if people need to be more over the pedals?

What are the axle standards on this frame?  15 or 20mm front and 12x142 rear? 

This info will help those looking so they can look at hubs too.

Size 56cm mold will be made in June.  Sorry, I don't think there will be a zero setback seat post for this frame. almost our road bicycle frame seat posts do have setback.

The axle standards ate front 100x15 and rear 142x12

Thanks for your questions.

98
What do you think about thru axle type disc road bike frame ?

Peter,
I'm interested by the 092 frame too.
What is the weight of the frame? And the fork?

Around 875+/-30g for size 52cm, and 400+/-15g for fork


99
From the pictures it looks like the post clamp might sit down inside a pocket and the hole is to access the clamp?

What size post does this frame use?  And is it standard round or a proprietary shape as many road bike posts are.

You are right, it is a proprietary shape seat post.

100
Here it is   :)

101
What do you think about thru axle type disc road bike frame ?

Here is one picture of our newest road disc frame for reference, it is a super light model 092 SL road frame, the other is V-brake version 082 Sl road frame.

BTW, we make these 2 models frames with BB86, no other options

102
29er / Re: IP - 036 questions by Gabby
« on: April 09, 2015, 03:01:14 AM »
I forgot to ask about frame size. I'm exactly 6 feet tall so would a 19 be the correct frame size for me?

Absolutely

103
Hi Peter, do you have straight pull hubs available as well (for MTB)?

Yes, of course, DT 240S hubs straight pull type, and Bitex straight pull hubs

104
We can assemble any road wheels tubular/clincher  20.5/23/25mm width rims with DT 180S/DT 240S hubs, Dt 350S road hubs as well

Here are some pictures for reference

Our website will be online in 10 days

Email: petercycles@foxmai.com
Skype: peterxu1206

105
Hi All, Im´Christer from Sweden, new to this forum.

I had the same experience, nice mail conversation with Peter when Bert suddenly took over. Anyway i ordered frame and wheels a week ago but havent heard anything since then.
Emailed Bert yesterday but no response yet.

Thanks for a great community!
/Christer

Hi Christer, thanks for your appreciating. Don't worry about your order, it was weekend yesterday, I think you will receive the tracking numbers for your order soon. And after I left Iplay, they have more things to do. Hope you can get your items soon.

Pages: 1 ... 5 6 [7] 8