Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - carbonazza

Pages: 1 ... 48 49 [50] 51 52 ... 165
736
29er / Re: Carbonda fm936 Thoughts
« on: June 15, 2021, 08:22:24 AM »
Quote from: Manofmanymissions on June 15, 2021, 03:23:09 AM
My FM936 build. 10,35 kg without pedals. Pretty light regarding it has a dropper post.

It looks awesome !
Not sure the chainstay protector will stay for long, but I like its minimalist design  :D

737
29er / Re: Carbonda FM909
« on: June 15, 2021, 07:25:22 AM »
Quote from: johnnchc on June 15, 2021, 05:24:00 AM
I requested a quote for the handlebar too and was told it was not in production. The handlebar is on the flybike website. It's called hb 156 http://www.flybike-asia.com/product/217.html I don't know if it'll ever be available without ordering a commercial quality. I ordered one of these handlebars (thanks carbonza) https://m.aliexpress.com/item/32967312663.html?trace=wwwdetail2mobilesitedetail&spm=a2g0n.store_m_allProduct.allProducts_11695160.32967312663

Beware this is not an internal routing handlebar.
There is no way to pass the cables through the headset if you want it fully integrated.

738
E-Bike Frames & Builds / Re: Light Carbon LCES004 E Bike Build
« on: June 15, 2021, 03:07:47 AM »
Quote from: Sitar_Ned on June 14, 2021, 03:05:37 PM
...Okay, Snacks... temporarily moved the thread to a higher traffic area...

There is that much of traffic difference between 29er and the rest ? wow.

739
29er / Re: Full suspension AM ~140mm chiner for virgin builder.
« on: June 15, 2021, 03:04:02 AM »
Quote from: Janchi on June 14, 2021, 01:47:20 PM
...The only other fault i found is the "lip" for upper bearing in the headtube there is some strange chipping. I don't think its an huge problem as it's not huge and to my eyes it's anyway not made of fibers, so it should not be structural...

Contact the seller with the picture to warn them now.
And just check after a few months, if it stayed in the same state.
Most probably it will, but if not, dealing with the pain of warranty at that time.

740
29er / Re: The shiney new AM831 Group Buy thread!
« on: June 14, 2021, 01:08:15 PM »
If they are late, they will invent any reason you are able to believe.
Just relax, while waiting they build your frame(s).
Bugging them regularly won't help your cause.

741
29er / Re: Ican S3 XC Frame
« on: June 13, 2021, 05:24:43 PM »
The picture is a little blurry, but it looks to be just scratches.
This part is particularly strong.
Did you try to hit the area with a coin, and listen if the noise is different from place to place ?
A cracked zone will have a muted sound.

742
26er & 27.5 (650b) / Re: XS Ican P1 Build
« on: June 11, 2021, 09:01:03 AM »
Quote from: elgaucher on June 11, 2021, 07:12:30 AM
...Last season she finally conquered her first black trails and this year only after 2 months of riding she’s got 3 doubles black done...
Wow... impressive. I'm an XC, roadie, gravel guy.
A true bunny hop is still a distant dream, but started to improve my skills too, to not waste my shiny new full suspension 8)

743
E-Bike Frames & Builds / Re: light carabon LCES004 build
« on: June 11, 2021, 03:39:51 AM »
Quote from: Snacks on June 11, 2021, 01:08:13 AM
I contacted cnebikes through their website for the motor.

Interesting to know: https://www.cnebikes.com/aboutus.html
Thank you.

744
29er / Re: Carbonda fm936 Thoughts
« on: June 11, 2021, 03:36:40 AM »
Quote from: victorike on June 10, 2021, 05:22:38 PM
I carry that with this other piece, so the weight is distributed between the three screws.
€ 11,00  27％ dto. | DRIFT MANIAC-soporte de almacenamiento para bicicleta, soporte para botella, adaptador
https://a.aliexpress.com/_uYQH0b
Ordered ! This will help, thank you.

I'm ordering all I can right now.
In about 9 days, the packages will arrive after July 1st here in Belgium.
Where all packages will now have VAT applied even for items below 23€.
The end of an era  ???

745
E-Bike Frames & Builds / Re: light carabon LCES004 build
« on: June 10, 2021, 02:53:39 PM »
Quote from: Snacks on June 10, 2021, 07:50:50 AM
I ordered a bafang m600 motor for the frame and a 600wh btf04 battery. They're going to take some time getting here  though so I have a couple months to gather the rest of the parts.
Did you order through Aliexpress/Alibaba ?

746
26er & 27.5 (650b) / Re: XS Ican P1 Build
« on: June 10, 2021, 02:56:22 AM »
Quote from: elgaucher on June 08, 2021, 10:31:08 AM
Hehe they are there, the gf didn’t want to add them to the pic, “it’s will look like a cable mess” I quote xD

We’re reusing her 11speed nx and sram level T for now :) well enough for her need and keep the build price lower

She may have modest needs, but she has a manual machine already :D

747
E-Bike Frames & Builds / Re: light carabon LCES004 build
« on: June 10, 2021, 02:52:13 AM »
Quote from: Snacks on June 09, 2021, 10:56:32 AM
Frame came in today. Looks really good
This is serious machinery.
What motor will you put in ?

Thank you for trying this!

748
29er / Re: Carbonda fm936 Thoughts
« on: June 10, 2021, 02:50:22 AM »
Quote from: KiwiKev on June 09, 2021, 06:13:09 PM
Thought I had better check for some of the issues that have been discussed on the forum and sure enough the lower pivot bolt is nearly 82mm - one clean cut with a hacksaw will fix that! Any other 'niggles' I should be looking for?

Did anyone reported that issue to Wing already?

749
26er & 27.5 (650b) / Re: XS Ican P1 Build
« on: June 08, 2021, 10:18:06 AM »
Quote from: elgaucher on June 07, 2021, 08:44:49 PM
A bit of bike p*rn.

Build is ready at 99%, waiting on shock hardware lol… always the little things.

Some of the things on that picture will change soon , still waiting on them to arrive like new cockpit and new dropper but not urgent for now
Maybe some brakes and shifter too ;D
Have fun for your build !

750
Road Bike Frames, Wheels & Components / Re: Frame suggestion
« on: June 07, 2021, 03:53:47 AM »
Quote from: cme on June 05, 2021, 10:54:19 PM
...I'm delighted both with the 1056 frame...Full internal cable routing is nice...

Did you post some pictures of the internal routing?
I quickly scanned the forum but couldn't find any.
I'm thinking moving the components of my Canyon to that frame next season, and do the internal routing.

Pages: 1 ... 48 49 [50] 51 52 ... 165