See likes given/taken
Post info | No. of Likes |
---|---|
ZTTO MTB M1 Boost hubs 28H 54T Ratchet
Hi guys, These hubs been to be new on AliExpress. Looking a lot like DT Swiss copycat. Anyone knows how to calculate spoke length for those? Data: Boost 28H F: 138g R: 231-250g depending on freehub end caps interchangeable freehub Micro Spline / Shimano 11s /XD freehub detachable 54T Ratchet System like DT Centerlock Straightpull ca. 100$ F+R https://a.aliexpress.com/_d75gYDS July 08, 2020, 03:05:30 AM |
1 |
Re: Syncros Fraser iC SL / Scott Spark 900 handelbar 90$ instead of 399$
Thank mate. Missing the "like" function so much on this forum
July 13, 2020, 08:07:23 AM |
1 |
Re: Carbonda fm936 Thoughts
You're the MAN! Much appreciation! So let's tell everyone via a news thread!Thanks @Medico July 20, 2020, 11:19:23 AM |
1 |
Ice-Tech 6-bolt disc brakes 160mm
Found these, maybe someone needs something like that: https://a.aliexpress.com/_BSHglX July 27, 2020, 12:21:30 AM |
1 |
Re: Syncros Fraser iC SL / Scott Spark 900 handelbar 90$ instead of 399$
rubbing marks after installation and various rotataions around the steerer tried to copy the pictures from r2 bike of 70mm stem, to give possibility to compare. https://r2-bike.com/SYNCROS-Vorbau-Lenker-Einheit-Fraser-iC-SL a little sharp around the inner edges. will also grind that off a little here is A2 screw for weight comparison here the original weight at r2-bike (70mm stem) July 29, 2020, 10:04:54 AM |
1 |
Re: Carbonda fm936 Thoughts
You guys are going to convince me to spend a lot of money here...I learned here from David Arthur that you should get your normal size. The frame is for short stems only. The reach seems long, but as the seat angle is very steep you won't have such a long reach in real life. Just check eff. top tube. Also Carbonda recommends a seatpost without setback on this frame. July 29, 2020, 11:50:58 AM |
1 |
Re: ZTTO MTB M1 Boost hubs 28H 54T Ratchet
What are your guys go-to for straight pull spokes? I just ordered these ZTTO hubs but haven't built straight pull before. I originally was going to go with Sapim Lasers, but now I'm reading horror stories about non-bladed spokes straight pull spokes, at least when needed to service them they just spin and it takes a ton of clamping force to hold the round spoke.There is something to it. Using round spokes, especially Lasers can be very troublesome. Three very important things you have to comply. Use linseed oil for nippels, destress spokes and Always overturn a spoke and make a quarter turn back. Best is to use bladed spokes like I'll do for this project. You can hold them way better July 29, 2020, 03:52:21 PM |
1 |
Re: Carbonda fm936 Thoughts
Then it's quite obvious this happened. With an electrically conducive medium like tubeless milk (electrolyte) there is a electrochemical corrosion going on. The Aluminum has a lower valence than the carbon so there is a constant ions transport from aluminum to carbon. Ths makes the aluminum corrode. It really dissolves. This can even lead to a complete nipple head failure and the ripping apart of nipple head and rest of nipple. This also happens with water, but it takes longer as water is faster evaporating like the persistent milk.Carbon or Aluminium rims? ALWAYS use brass nipples when buildung carbon rims you want to run tubeless and you want to ride your bike also in wet weather conditions. Salt from the winter times, even help the corrosion. The avaiation learned it the hard way, as they were placing aluminum ribs on bare carbon. Nw they are using a insolation layer between the both like glassfiber. July 31, 2020, 08:02:47 AM |
1 |
Re: ZTTO MTB M1 Boost hubs 28H 54T Ratchet
here are the pictures. Like I said, I ruined the right end cap on the rear hub, when I wanted it to get off the axle. FH: 139g RH: 240g August 03, 2020, 08:12:01 AM |
3 |
Re: Carbonda fm936 Thoughts
My frame arrived!love it! You have balls! clearance seem to be very small, but should be fine I guess. Will also run the 42.5 and try not to bottom out. I'm not a true XC rider with all that jumping. Just wanne have a very smooth riding fast bike with which I can ride in the woods and on the streets and on gravel. August 04, 2020, 01:59:12 AM |
1 |