See likes given/taken
Post info | No. of Likes |
---|---|
Re: Velobuild VB-R-168 Frame
Hello everyone, I finished my VB-R-168 a few days ago. I've been testing it and I have a little problem with the disc brakes, which are Force AXS. When pedaling standing up and tilting the bicycle, the pads rub slightly. I would like to know if they have happened to them. I have also changed the derailleur hanger and put this one on it: https://es.aliexpress.com/item/1005001741343749.html?spm=a2g0o.order_list.order_list_main.35.7768194dtsW8Rn&gatewayAdapt=glo2esp. November 28, 2023, 04:41:27 PM |
4 |
Re: Velobuild VB-R-168 Frame
Hey, great build, looks very clean! Thank you so much. The calipers are well centered. It only sounds when I get up and move my bike from side to side. She asked in case it was something general and the fork has a little bit of flex. The rubber is not the original. I put the rubber links and the supports for the carbon seat. https://es.aliexpress.com/item/4000452319651.html?spm=a2g0o.order_list.order_list_main.52.21ef194dtWad0v&gatewayAdapt=glo2esp https://es.aliexpress.com/item/1005005559166257.html?spm=a2g0o.order_list.order_list_main.134.21ef194dtWad0v&gatewayAdapt=glo2esp November 29, 2023, 04:21:10 AM |
1 |
Re: Velobuild VB-R-168 Frame
Hi, Hello. The frame is for BB86 PressFit. You have to use one of this type: https://www.bike-components.de/en/SRAM/DUB-Pressfit-Road-86-5-mm-Bottom-Bracket-p68729/ Or one of this type with a thread in the center. https://es.aliexpress.com/item/1005005502918246.html?spm=a2g0o.order_list.order_list_main.114.21ef194dxJ4PAQ&gatewayAdapt=glo2esp November 29, 2023, 12:00:28 PM |
1 |
Re: Velobuild VB-R-168 Frame
Nice bike, no ffedback on the rubbing disc, but can suggest to make sure the spokes are tight to the correct tension. some wheel flex is expected when you sprint, but should not be too much to cause rubbing. Thank you so much. The wheels are from a company called Carbonal. They have many mounting options and they roll very well, they are good wheels. Specs are 45mm depth, 18mm internal width, DT240 hubs and Sapim CX-Ray spokes. The rims are tubeless, have no spoke holes, MoMag mount December 01, 2023, 04:45:23 AM |
1 |