I see a lot of complaints about the Winspace Agile geo, can someone explain why it's geo is 'weird?' 

It seems like the idea behind it was to make a hyper aggressive body position with a high BB, basically a purpose built crit bike.

Most brands I have M frame, with 174 height I went with L and the frame (i do have T1500, all in all almost same) is perfect for me.
Very snappy feeling, responsive but still very confident on alpine descents.
Geometry is agressive and it is one of the most agressive on the market, but still manageable if you are racing.

Make sure you torque enough & use carbon paste.
If it's a tolerance thing, then consider using a soda can shim, or some fiberglass cloth.
Also consider greasing the thread of the plug, especially if you've sweated on it. The torque shouldn't go into turning the screw, the torque should go into pushing the expander into the seat post.
Afaik, save for crazy exceptions, "all" seatpost slipping is fixable.

Got the replacement seatpost from Yishun. Same story here, 70km ride, it is slipping.
Small piece of sandpaper did not helped. Carbon paste is still there and it is torqued enough.
This issue drives me nuts, otherwise frame is ok ...

Hi Everyone,

You can visit Adapt Bike at Eurobike to check some news

Hall 9.1 - B13D - In Frankfurt 3th to 7th of July.

The frames are top quality and they are very service minded.

Are you sellling to the end customers?
Do you have shipping options to Europe?

Received reply from yishun,frame available in August,900€ with shipping from Germany.
I think that I finally found my next frame

I ordered recently R-086 (aero one from them). Got 820 EUR quoted.
In general, I like geometry and ride feel.
However, the very very big negative for me is the seatpost slipping down. I am pretty much freaked out at any decsent.
Support from Yishun exists, but I am not really sure they can solve an issue.
I will keep you posted if I have luck.

T1500/T1550 I can recommend, very happy after 10k km in a year with it. The build however, comes closer to the original Merida Reacto.
I would go the same route, if you like to choose your own components or have fun building bikes.

Dear Leo, if you would be able to provide wider rim, like 29-30mm wide with 21-22 internal width, I am sold.
Right now this is my choice:
https://eu.huntbikewheels.com/collections/road-cx-disc-brake-wheels/products/hunt-44-aerodynamicist-carbon-disc-wheelset
Depth 45-50-55 for different audiences.
With that you can cater "casual racers", "aero gravel racers" or even hill climbers which value some aero advantage.
No old standards even for cheap please.

Does anyone know, will 7x9mm rails (typical for most of carbon saddles) fit ?
Winspace T1500 has side clamp, not top-bottom one.
I am a bit concerned about safety because of possible wrong clamp.

I have spare FSA N69 for sale, as I went with a custom solution:
https://chinertown.com/index.php/topic,4081.0.html