Author Topic: Chiner chainring clearance  (Read 2448 times)

flanglian

Chiner chainring clearance
« on: June 21, 2014, 04:11:35 AM »
I'm wondering what advice people have with regard to max inner chain rings on the Chiner frames? At the moment I'm trying to decide whether to order an IP256 or IP057 and will be going with a BSA bottom bracket. 



Carbon_Dude

Re: Chiner chainring clearance
« Reply #1 on: June 21, 2014, 05:37:28 AM »
I have a 32T XX1 ring on my IP-057, I would think a 34T should fit no problem.  Not sure about anything bigger than that.
2019 Stumpjumper Expert 29/27.5+
2017 Santa Cruz Stigmata
2017 Trek Stache 9.8 (29+)
2016 Specialized Stumpjumper FSR Carbon Comp 6Fattie (27.5+) (Sold)
2016 Trek Stache 9 (29+) w/upgrades (Sold)
2014 -036 Full Suspension Chiner (Sold)
2013 -057 Hardtail Carbon Chiner (Sold)
Atlanta, GA

Sitar_Ned

Re: Chiner chainring clearance
« Reply #2 on: June 21, 2014, 06:08:18 AM »
32t raceface ring/shimano crank on 057 here.. 34t will be fine.. bigger than that, not sure:




hwahl

Re: Chiner chainring clearance
« Reply #3 on: June 23, 2015, 04:31:19 AM »
I can confirm that 34T is really close. I'm using a 34T XX1 crank gxp crank on ip-057.
In this picture the bottom bracket is chimmed to get the straithest chainline, if i move chimms around it would be possible tho fit 36T

carbonazza

Re: Chiner chainring clearance
« Reply #4 on: June 23, 2015, 04:49:21 AM »
hwahl, What do you mean by the straightest chainline?
Putting the chain on the sprocket in the middle of the cassette, and having it straight with the chain ring?

hwahl

Re: Chiner chainring clearance
« Reply #5 on: June 30, 2015, 02:05:41 AM »
Yes that is what I ment. I Noticed that when i installed the bottom bracket as discribed in the manual one spacer at each side the chain lined up with the 9 - 8 th gear. Instead I put the spacers on the non drive side and it lines up better with the other gears.

By the way Im running BSA BB. It could be another story if you got the pressfit BB

/ Henrik