Hygge Aero Carbon Frame

[Allan_Hun]

Yes, mine are 30,5mm and there is enough space.

Im a bit curious what tire model+size and rim width you measured at 30,5mm?

[Allan_Hun]

The rear caliper is screwed directly on my frame without adapter. I don't know if you can install one, sorry.

Edit : Apparently yes :
http://r2-bike.com/SHIMANO-Adapter-Flat-Mount-20-160-mm-rear

So if I get a 140mm disc I can mount the rear BR-R7170 directly on the frame?
And use the extra 160mm as replacement when the front disc needs replacement...

[TidyDinosaur]

Im a bit curious what tire model+size and rim width you measured at 30,5mm?

I have the vittoria corsa n.ext tlr on 24mm internal rims.

[BeR]

So if I get a 140mm disc I can mount the rear BR-R7170 directly on the frame?
And use the extra 160mm as replacement when the front disc needs replacement...

Correct.

[Fleckinger]

I have 30mm Grand Prix 5000 S TR on 26mm internal hooked rims, they measure as 32.5mm wide and 27.2 high. There's enough side clearance in the fork (around 6.5-7mm), but tire height is the main limitation with only 4mm of free space. The situation is reversed with the frame. Even with the same tires and wheels, there's only about 4.5mm of side clearance and over 8mm of height clearance.

[TidyDinosaur]

I have 30mm Grand Prix 5000 S TR on 26mm internal hooked rims, they measure as 32.5mm wide and 27.2 high. There's enough side clearance in the fork (around 6.5-7mm), but tire height is the main limitation with only 4mm of free space. The situation is reversed with the frame. Even with the same tires and wheels, there's only about 4.5mm of side clearance and over 8mm of height clearance.

Yeah, it's too bad they did not make the fork a little higher on the inside to give a little more clearance.