« previous next »
Pages: [1]

Author Topic: Frame that accepts higher volume tires?  (Read 3313 times)

sherpaxc

Frame that accepts higher volume tires?
« on: September 14, 2014, 06:42:40 PM »
I was wondering what frame would accept a 2.4 Ardent in the back?  Anyone know?
Thanks!
Logged


Carbon_Dude

Re: Frame that accepts higher volume tires?
« Reply #1 on: September 14, 2014, 07:08:24 PM »
I'm pretty sure my IP-057 frame will.  Although, it also depends on how wide your rim is, a wider rim will allow the tire to have a wider profile.  My 30mm wide carbon rims have space to spare with my Saguaro Geax 2.35" tires.
Logged
2019 Stumpjumper Expert 29/27.5+
2017 Santa Cruz Stigmata
2017 Trek Stache 9.8 (29+)
2016 Specialized Stumpjumper FSR Carbon Comp 6Fattie (27.5+) (Sold)
2016 Trek Stache 9 (29+) w/upgrades (Sold)
2014 -036 Full Suspension Chiner (Sold)
2013 -057 Hardtail Carbon Chiner (Sold)
Atlanta, GA

sherpaxc

Re: Frame that accepts higher volume tires?
« Reply #2 on: September 14, 2014, 07:35:04 PM »
I've got Stan crests now, but was looking at getting some wider carbon rims.  So the wider rim gives it a wider profile, does that mean less clearance?  Sorry for my ignorance. This is a great site. The mtbr thread is way overwhelming and loads way too slow.
Logged

Carbon_Dude

Re: Frame that accepts higher volume tires?
« Reply #3 on: September 14, 2014, 08:00:46 PM »
Yes, wider rim = wider profile on the tire = less clearance at the chain stays.  How wide are the rims you are looking at?

In another post I made some measurements of tire width on my rims, don't have the numbers handy, but no clearance issues on either my IP-057 or IP-036.
Logged
2019 Stumpjumper Expert 29/27.5+
2017 Santa Cruz Stigmata
2017 Trek Stache 9.8 (29+)
2016 Specialized Stumpjumper FSR Carbon Comp 6Fattie (27.5+) (Sold)
2016 Trek Stache 9 (29+) w/upgrades (Sold)
2014 -036 Full Suspension Chiner (Sold)
2013 -057 Hardtail Carbon Chiner (Sold)
Atlanta, GA

Vipassana

Re: Frame that accepts higher volume tires?
« Reply #4 on: September 15, 2014, 12:40:26 AM »
I can tell you that the IP-256SL is pretty full with a 2.25 Racing Ralph on a 30mm hookless rim.  There is perhaps a bit more room to fit a 2.35, but it would be very snug and your probably beat up the frame when mud and rocks tried to squeeze by.  With the 2.25 RaRa, there is about 0.25" between the outer tire tread lugs and the inner chain stay.
Logged

seat_boy

Re: Frame that accepts higher volume tires?
« Reply #5 on: September 17, 2014, 01:21:31 PM »
My IP-106 can fit a 2.4 Mission Vee (a pretty small-knobbed tired) on a 35mm rim.
Logged
My blog, some of it about China Carbon stuff:
http://www.bikingtoplay.blogspot.com/

MTB2223

Re: Frame that accepts higher volume tires?
« Reply #6 on: September 18, 2014, 02:41:22 PM »
Quote from: Vipassana on September 15, 2014, 12:40:26 AM
I can tell you that the IP-256SL is pretty full with a 2.25 Racing Ralph on a 30mm hookless rim.  There is perhaps a bit more room to fit a 2.35, but it would be very snug and your probably beat up the frame when mud and rocks tried to squeeze by.  With the 2.25 RaRa, there is about 0.25" between the outer tire tread lugs and the inner chain stay.
I've got the same configuration.
I made some pictures of the space that's left.

Logged

PHeller

Re: Frame that accepts higher volume tires?
« Reply #7 on: September 22, 2014, 09:42:00 AM »
What about downsizing to 27.5 in the 29er frame and using the Trailblazer 2.8?
Logged

adym

Re: Frame that accepts higher volume tires?
« Reply #8 on: September 22, 2014, 12:34:11 PM »
I'm not convinced trailblazer will fit, that clearance is tight. And you have to mess with new wheels etc.
Logged
Pages: [1]
« previous next »