Lexon "Riot 10"

[MTBman]

What size bearings do i need, both at the main pivot and at the linkage? My apologies if its been answered already l must have missed it. Thanks

upper shock link
6800 (19 x 10 x 5) - 2 pcs

linkage
698  (19 x 8 x 6) - 4 pcs

main pivot
6902 (28 x 15 x 7) - 2 pcs

ENDURO MAX LLU fits fine

[Silverado123]

You da bomb!

[Silverado123]

What are you guys using for headsets? I am using a semi integrated Cane Creek Slam Set. Are you all using a pressed in headset like l am or a drop in, integrated headset?  My frame is making some serious groaning noise that sounds like its coming from the front of the bike.  Try to get to the bottom of what is going on

[tocache]

Mine went with the exit hole of the derailleur cable under the chainstay... I had to 3D print a fixation plate with 45 degress cable mount that I put on the frame.

[Silverado123]

Does anyone one else have an exceptionally loud, squeaky linkage? I was enquiring about new bearings to fix the squeak and the new bearings did fix the issue. Very temporarily.
I service the bearings and within Maybe 2 hours squeak is back.
I can see on the link where the bearing is wearing hard so l know the culprit.
Anyway, l contacted the seller about getting a new one earlier today. Hopefully they have one they can sell.

Does anyone here have an link l could buy off them maybe from an old frame?

[Silverado123]

Apparently Lexon official store on Ali won't ship to the United States. Supper annoying. If any one is cool with shipping to your address and then mailing it to me that would be most appreciated.

[Tijoe]

Mine went with the exit hole of the derailleur cable under the chainstay... I had to 3D print a fixation plate with 45 degress cable mount that I put on the frame.

Ingenious!  OTOH, I've migrated to Wheeltop EDS derailleurs on all my bikes, so I no longer have to deal with derailleur cable routing.   

[marq3z]

anybody knows where can i purchase this screw set? yesterday mine was broken  :'(
i've write to ali shop where bought the frame and they will send a new one but i think that it is not a good quality screw and i wanna change them for another better

again the same problem...  :'(
any recomendations? could be better with trunion?