FS-AM831 Derailleur hanger

[hagerd]

Hi Everyone. Been riding my AM831 with the V2 rear triangle, and its been great. Had a bit of an off trail excursion and bent my hanger. Luckily i ordered a spare when i ordered the frame. Does anyone know if this is a standard part used in another frame? I want to buy another spare, these becoming unavailable at some point in the future freaks me out.

[neuesten]

yeah....me too need some spare hanger...

[Jal]

Hello!
These for Cube and Radon seem the same, although I can't be 100% sure if they perfectly fit, I'm just guided by the photos, I haven't checked:

                            https://www.bike-discount.de/en/cube-derailleur-hanger-2090-axh-short

                            https://www.bike-discount.de/en/radon-derailleur-hanger-10240-axh-short

In these Cube and Radon hangers, the piece with the thread for the thru-axle has a finer thread pitch (1mm instead of 1.5mm), so you would have to install the old one, or else you would have to install an X-12 thru-axle (which has 1mm thread pitch) with a flat seat (not tapered) at the other end of the axle, so that it rests correctly on the frame.

Beware!
There are these other that seems the same, but they are not:

                            https://www.bike-discount.de/en/cube-mtb/rr-x12-standard-derailleur-hanger

                            https://www.bike-discount.de/en/radon-derailleur-hanger-8651

This one is a little longer (it says "standard" instead of "short" version) and the derailleur may be too far away and may not work well, especially with 12-speed transmissions, for which the short version is indicated.

[Eddy-haideli]

https://www.ebay.com/itm/265680820025

It can be paid on this listing for the rear hanger.

Thanks
Eddy

[JJJ]

Also available here: https://fr.aliexpress.com/item/1005001935571629.html
Make sure you select the "For FS831 Use" option.