Interesting Aliexpress finds! - good deals, interesting stuff, new products etc!

[shaxberd]

I considered the Wuzei but ended up ordering a Kore one on eBay as it was way cheaper than at AliX - should be here in a week or so, curious to see whether it got the same long-ish axle dimensions that TV mentioned. Looking to run it as a 1x with a spider PM too, will report back!

[hoolabalooza]

I can confirm the Continental Grand Prix TR are the real deal. Just bought two after buying some from a reputable european seller last year. They are 100% the same, they even have that specific Conti tyre smell. Comes out quite a bit cheaper when buying the no box version (2/3 the price for me).

[jonathanf2]

I considered the Wuzei but ended up ordering a Kore one on eBay as it was way cheaper than at AliX - should be here in a week or so, curious to see whether it got the same long-ish axle dimensions that TV mentioned. Looking to run it as a 1x with a spider PM too, will report back!

I ordered the Wuzei and it arrived yesterday. It was cheaper for me using the AliEx anniversary coupons. It looks to be identical to the Kore crankset, but that one has a fancier glossy finish. While this crankset weighs more compared to other carbon cranksets, the crank arms appear wide and stiff (similar to the Xcadey Ventus crankset). Also I'm not worried about the longer axle, I'm going to run it 1x on my gravel bike with an internal T47 bottom bracket. On a side note, I really like the bolt design compared to other carbon cranksets. The crank bolts use a standard cassette tool to remove the hex screw. Maintenance should be easy.

[Ultramic]

I can confirm the Continental Grand Prix TR are the real deal. Just bought two after buying some from a reputable european seller last year. They are 100% the same, they even have that specific Conti tyre smell. Comes out quite a bit cheaper when buying the no box version (2/3 the price for me).

After about 5,000km I experienced large sidewall cuts to both the front and rear - different times but within weeks of each other. The wear marks were still clearly visible and I would estimate they were about 2/3rds worn. Maybe just bad luck, I've got more spares so will see if I experience the same thing in 5,000kms time.

[alfiomotrambo]

After about 5,000km I experienced large sidewall cuts to both the front and rear - different times but within weeks of each other. The wear marks were still clearly visible and I would estimate they were about 2/3rds worn. Maybe just bad luck, I've got more spares so will see if I experience the same thing in 5,000kms time.

You mean this https://it.aliexpress.com/item/1005005340384228.html?

[Eskae]

looks like there's a new clone of the Brooks Cambium saddle.  Photos indicate a rear width of 15cm, so I guess it would be similar to the C15 model.  I ordered two, as they are about $17 each in the USA.  I ride Cambium C17s on all of my bikes, and I'm curious how these will compare overall.  I'll report back in a few months after they've arrived and I test one out.

https://www.aliexpress.us/item/3256811556559818.html?

The saddles arrived today and they really are a close clone of the Cambium.  Construction seems to copy all of the Cambium features in terms of the rivets and how it is assembled.  Compared to a Brooks C17, the three main differences are:

• the rear width is a bit more narrow (as expected)
• the overall length of the saddle is about an inch shorter than the C17
• the top cover of the saddle seems to be textured rubber, and has a slightly tacky feel.  The Cambiums use a synthetic cloth cover than is smooth.

I'll have to see how it rides, next.

[Eskae]

Here's some photos of the Cambium copy saddle.  Upon closer inspection, there is no cloth top like a Brooks.  I think the top is just molded from the same material the saddle is made of.  I've attached photos, including some where I held it side-by-side with an authentic Brooks C17 for comparison.

[jonathanf2]

Finally got around to installing my Wuzei carbon crankset in 3 bolt. It's well made and stiff. Though I'm now thinking 160mm cranks are my sweet spot after giving 155mm a try.

[alfiomotrambo]

They look beautiful! Let us know how they go and how you like them!
I'm torn between those and these HUDUD Carbon Crank https://it.aliexpress.com/item/1005011776046372.html They look like titanium, anyone ever tried this?

Now a new one comes out every month

[kazuviking]

Kocevlo Carbon Wave handlerbar for gravel, cx and road usage. Havent seen any mention it or i just missed it. https://www.aliexpress.com/item/1005010533212720.html

[jonathanf2]

They look beautiful! Let us know how they go and how you like them!
I'm torn between those and these HUDUD Carbon Crank https://it.aliexpress.com/item/1005011776046372.html They look like titanium, anyone ever tried this?

Now a new one comes out every month

I only bought the Wuzei for the 3 bolt chainring mount. For absolute weight savings that HUDUD looks like the way to go. There's also the RPANTAHI crankset that's a bit cheaper, but weighs more. Between these two, it comes down to weight versus cost savings.

https://www.aliexpress.us/item/3256811690372791.html

[alfiomotrambo]

I only bought the Wuzei for the 3 bolt chainring mount. For absolute weight savings that HUDUD looks like the way to go. There's also the RPANTAHI crankset that's a bit cheaper, but weighs more. Between these two, it comes down to weight versus cost savings.

https://www.aliexpress.us/item/3256811690372791.html

Looks like the Clavicula crank Thanks

[crazyravr]

I just found this on AliExpress:  | CYCLAMI 18T Bicycle Jockey Wheel Rear Derailleur Ceramic Pulley Bike Guide For AXS RED Road Bike L-TWOO ERX ER9 R9 R7
https://a.aliexpress.com/_mNqqctj

Has anyone installed this on a 12spd 105 or Ultegra cages? Is it simple plug and play and were modifications required?

[kazuviking]

Has anyone installed this on a 12spd 105 or Ultegra cages? Is it simple plug and play and were modifications required?

From the limited reviews it have basically ZERO grease/oil applied to the ceramic bearing. Any grime will destroy the weak ceramic bearing in a very short timeframe.

[alfiomotrambo]

I just found this on AliExpress:  | CYCLAMI 18T Bicycle Jockey Wheel Rear Derailleur Ceramic Pulley Bike Guide For AXS RED Road Bike L-TWOO ERX ER9 R9 R7
https://a.aliexpress.com/_mNqqctj

Has anyone installed this on a 12spd 105 or Ultegra cages? Is it simple plug and play and were modifications required?

I don't think you can install it on shimano cages, only ltwoo or SRAM. If you need an OSPW you can get the ryet one https://it.aliexpress.com/item/1005008456209648.html