Water bottle cage

[thebigmotorunit]

Can anyone recommend a water bottle cage that functions well and doesn't look hideous?

[carbonazza]

More expensive than before,  but these are great:
US $19.46  19％ Off | OG-EVKIN BC-006 Carbon Bottle Holder Titanium Alloy Ultra-Light Bottle Cage Bike Bottle Holder For MTB /Road Bicycle Accessories
https://a.aliexpress.com/_EJw76Dp

They are light, and I never lost a bottle, on bumpy trails.
But the carbon makes your bottles get black.

Otherwise for half the cost but 7g more
https://r2-bike.com/VOXOM-Bottle-Cage-FH3
But I find the bottles to be harder to put and get
Decathlon sells the same model under their name.

[bxcc]

I have probably 10 years or so on either of these. I use the side load ones on frames with minimal bottle clearance. I've purchased both styles from various vendors with no issues and both hold the bottles securely.

https://www.aliexpress.us/item/3256803903058538.html?spm=a2g0o.order_list.order_list_main.11.61431802ICz06O&gatewayAdapt=glo2usa&_randl_shipto=US

https://www.aliexpress.us/item/3256804428345607.html?spm=a2g0o.productlist.main.25.3f8c41feoI0Qci&algo_pvid=78298300-176e-44f3-a5b4-ebee780f58c4&algo_exp_id=78298300-176e-44f3-a5b4-ebee780f58c4-12&pdp_ext_f=%7B%22sku_id%22%3A%2212000029838375398%22%7D&pdp_npi=3%40dis%21USD%2148.97%2121.55%21%21%21%21%21%40211bf14716795714555605972d0717%2112000029838375398%21sea%21US%21722722606&curPageLogUid=fDKCOhohYlVA

[carbonazza]

I have probably 10 years or so on either of these...

I had these before and found the little bottom piece quite fragile.
It snapped on both bikes I did install it.
I must be too brutal with the bottles, if you had them for 10+ years

[bxcc]

After a 10 year hiatus from riding, I got back into it in 2011. Grabbed a couple of the lightweight ones shortly thereafter so somewhere in the 10 year range, not sure exactly. Only one I broke was my fault as there wasn't enough room in the frame to get the bottle out properly. Repaired with some G-Flex epoxy and some fiberglass and it's on my winter bike now. That's when I started getting the side load ones for certain bikes. Between my kids, wife, and myself, I've bought and sold just a few. But I don't think any of them have over 1,500 miles of use.

[carbonazza]

With the side ones, I was losing often bottles on bumps.
At the beginning they were firm, but then after a while they started to get loose.
Maybe I was unlucky, as there are many builders and got a poor model.

[frnchy]

For side load cages, I love the Lezyne Flow SL - pretty cheap, looks good, and most importantly has a very good hold on bottles. I've had no issues retaining full 750ml bottles over some really rough terrain on my gravel and mountain bikes.

[bremerradkurier]

I've had these Arundel replicas (no logo) for over four years and still holding great without marring bottles.

https://www.aliexpress.us/item/2251832571618039.html?spm=a2g0o.order_list.order_list_main.242.21ef1802CPLBcX&gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=US

[dsveddy]

Anyone have experience with those ultralight 7 gram cages?

[jcr]

I went cheap, light and non-carbon and these seems to work fairly well on the road. https://www.aliexpress.com/item/1005002309399133.html

[carbonazza]

Anyone have experience with those ultralight 7 gram cages?

Which ones ?

[Pedaldancer]

With the side ones, I was losing often bottles on bumps.
At the beginning they were firm, but then after a while they started to get loose.
Maybe I was unlucky, as there are many builders and got a poor model.

I have a pair exactly as you describe, and I have a pair from Deemount. The latter ones are  really firm. I made 800km with my 909 with them attached and they were always keeping my bottle secure. I did even a race with them and usually I am a very careful rider but in that race i just focused on being fast 

The Deemount branding can be removed with a bit of acetone.

€ 10,78  42%OFF | Deemount Super Light 25gram MTB Bike Carbon Fiber Bottle Cage Bicycle Water Bottle Holder Stainless Steel Bolts included
https://a.aliexpress.com/_Euxzvnl

[wfl3]

I've had these Arundel replicas (no logo) for over four years and still holding great without marring bottles.

https://www.aliexpress.us/item/2251832571618039.html?spm=a2g0o.order_list.order_list_main.242.21ef1802CPLBcX&gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=US

Ditto, been using these arundel clones for close to a decade.  They hold the bottles REALLY well and have been 100% reliable.

On the clones make sure you get the ones that have the ridge on the foot that the bottle sits on - it increase the strength tremendously. 

[Shinso]

Anyone have experience with those ultralight 7 gram cages?

Yes, I'm running a pair of them on my Spcycle M-05, not dropped a bottle yet.  Recommended.

[coffeebreak]

Yes, I'm running a pair of them on my Spcycle M-05, not dropped a bottle yet.  Recommended.

Do you have link for this?