Hygge Aero Carbon Frame

[laktattausch]

I thought about this but these gramm-savings are not in relation to the performance lost in my opinion. Maybe change to DuraAce Cassette but this is a too expensive wearing part. I am riding ZTTO Cassette on my 11-speed 105 bike with no problems (done Paris-Brest-Paris with this) but for 12 Speed and Di2 the opinions are divided.

[TidyDinosaur]

I thought about this but these gramm-savings are not in relation to the performance lost in my opinion. Maybe change to DuraAce Cassette but this is a too expensive wearing part. I am riding ZTTO Cassette on my 11-speed 105 bike with no problems (done Paris-Brest-Paris with this) but for 12 Speed and Di2 the opinions are divided.

Yeah, cassettes are on my list of parts that I probably will never buy from Ali again... Had to go through 3 ZTTO cassettes and 7 chains (those are also on the list) in a couple of 1000km's to realise this is not the area to save money.

Sram and Shimano for cassettes and chains since then.

[StevenC]

Nearly finished my build.

Final result will come at the end of this week.

Goal sub 7kg will be reached - any tips to save some weight?

What did you use to hold the Di2 battery in the seatpost?

[laktattausch]

Simply a piece of foam the frame was wrapped in

[joegal]

Nearly finished my build.

Final result will come at the end of this week.

Goal sub 7kg will be reached - any tips to save some weight?

You could save about 15 gramms on that ZTTO Foam Hose Liner.
The Blue Capgo anti-vibration foam (https://www.bike-components.de/de/capgo/Noise-Protection-Schaumstoffhuelle-fuer-Bremszugaussenhuelle-p60382/?o=502308-blau-2-m) is a lot lighter. It weighs about 1.5 Gramms per meter.

Sorry for making you rip apart your bike again Nice build tho!

[KalviDj]

Nearly finished my build.

Final result will come at the end of this week.

Goal sub 7kg will be reached - any tips to save some weight?

Aren't those headset bearings 8mm height? I've measured the ones included by Hygge and they are 6.5mm

[laktattausch]

That was no problem. They sit pretty close in the frame. I had to grind the center ring which was delivered with the Avian handlebar 2 Millimeters. But that's no problem because the material is 3D printed plastic. All sits pretty snug and there is no play in the headset.

[laktattausch]

You could save about 15 gramms on that ZTTO Foam Hose Liner.
The Blue Capgo anti-vibration foam (https://www.bike-components.de/de/capgo/Noise-Protection-Schaumstoffhuelle-fuer-Bremszugaussenhuelle-p60382/?o=502308-blau-2-m) is a lot lighter. It weighs about 1.5 Gramms per meter.

Sorry for making you rip apart your bike again Nice build tho!

Thanks for your tip on the foam. I think I will change it when I have to change the bearings in the future. Only for that few Gramms that's too much work 

[laktattausch]

Bike is ready - first ride tomorrow. 

Weight including pedals, Wahoo-mount and Fidlock-Holders (without bottles).

[BeR]

What did you use to hold the Di2 battery in the seatpost?

I use this one and it fits in the seat tube.

[TidyDinosaur]

Bike is ready - first ride tomorrow. 

Weight including pedals, Wahoo-mount and Fidlock-Holders (without bottles).

It's amazing you managed to keep the weight so low

[patliean1]

I love seeing budget frames built with premium components.

[aeroskiii]

Nearly finished my build.

Final result will come at the end of this week.

Goal sub 7kg will be reached - any tips to save some weight?

a new crankset light a skypivot would be a lot lighter or the new stuff from elilee thats coming out soon (24mm spindle)

[Dmgreen13]

I have just finished 600km and 7000m of climbing over 6 days on my frame riding to watch the Tour Down Under stages on some pretty poor road surfaces. So far the frame has performed above expectations.

[laktattausch]

I think they did a new fork design with changeable inserts. Picture from their last Facebook post: