Hygge Aero Carbon Frame

[Allan_Hun]

Yes, mine are 30,5mm and there is enough space.

Im a bit curious what tire model+size and rim width you measured at 30,5mm?

[Allan_Hun]

The rear caliper is screwed directly on my frame without adapter. I don't know if you can install one, sorry.

Edit : Apparently yes :
http://r2-bike.com/SHIMANO-Adapter-Flat-Mount-20-160-mm-rear

So if I get a 140mm disc I can mount the rear BR-R7170 directly on the frame?
And use the extra 160mm as replacement when the front disc needs replacement...

[TidyDinosaur]

Im a bit curious what tire model+size and rim width you measured at 30,5mm?

I have the vittoria corsa n.ext tlr on 24mm internal rims.

[BeR]

So if I get a 140mm disc I can mount the rear BR-R7170 directly on the frame?
And use the extra 160mm as replacement when the front disc needs replacement...

Correct.

[Fleckinger]

I have 30mm Grand Prix 5000 S TR on 26mm internal hooked rims, they measure as 32.5mm wide and 27.2 high. There's enough side clearance in the fork (around 6.5-7mm), but tire height is the main limitation with only 4mm of free space. The situation is reversed with the frame. Even with the same tires and wheels, there's only about 4.5mm of side clearance and over 8mm of height clearance.

[TidyDinosaur]

I have 30mm Grand Prix 5000 S TR on 26mm internal hooked rims, they measure as 32.5mm wide and 27.2 high. There's enough side clearance in the fork (around 6.5-7mm), but tire height is the main limitation with only 4mm of free space. The situation is reversed with the frame. Even with the same tires and wheels, there's only about 4.5mm of side clearance and over 8mm of height clearance.

Yeah, it's too bad they did not make the fork a little higher on the inside to give a little more clearance.

[BAR]

How long it usually takes from purchase to shipment by seller? Does anyone bought frameset at the middle/end of june?

[Fleckinger]

How long it usually takes from purchase to shipment by seller? Does anyone bought frameset at the middle/end of june?

My frame was sent in 2 days, but I ordered it on the 11.11 sale.

[BAR]

My frame was sent in 2 days, but I ordered it on the 11.11 sale.

Mine is still im manufacture. Gotninfo that they upgrade eps mould so inside the frame will be much smoother. Bought 22.06 and still waiting roll shipment.

[Allan_Hun]

So the frame use eps tech?
Very tempting... Have the issue with play in the front fork been solved?

[Lotnik]

So I read the thread and still a bit confused about the play in the fork. What are the dimensions of spacer beside the thickness of 0.3 mm? Are there any specific spacers to buy?

[BAR]

Does someone is waiting for shipping hygge frame from lasy sale 17-23.06?

[syva]

Hi all. I received my frame last week and am now trying to build it. I am finding it impossible to route the rear Di2 wire through from the hole on the chainstay across into the bottom bracket. There seems to be some kind of blockage half way through the chainstay. I tried to see if something more rigid would pass and not even regular shifter cable housing could get beyond a certain point. Has anyone else had this issue? Thank you...

EDIT: okay I managed it in the end with a magnetic routing guide. It took a lot longer than I was expecting...

[Thomas BT]

Hello everyone,

I received my frames a few days ago but the rear derailleur hanger seems to be missing from the box, does anyone knows what hanger I should get for this frame ?

Also I've seen some cheaper ceramic bottom bracket on aliexpress rather than the crazy expensive ceramspeed ceramic bottom bracket. I wondered if any of you ever had an experience with these aliexpress ceramic bearing bottom bracket?

[drscrote]

I've just assembled mine, it's the nicest Chinese frame I've had. Previously had a 3T Exporo clone and Longteng LTK118.

No major issues with the build or running the cables.

No rear mech hanger in the box but they sent one out quickly.

Size M, haven't cut down the steerer yet. I'm 181cm with a 74cm BB to saddle height and relatively short legs. 85cm inseam. All my previous bikes are 56cm and this looks a good fit.

I got the Hygge Shun wheels too, in F50 R60mm. The freehub is offensivley loud if thats your thing!

Everything from Aliexpress except the 28mm GP5000s and sealant.

Ultegra DI2 shifting and brakes.
XT rotors
Leese carbon cranks 52-36. The chainline is a bit funky and I haven't worked this out yet. As a workaround I've spaced out the FD mount with washers.
Zitto 11-32 cassette
Cheapo saddle.

7.4kg as is with the Assiomas.

Quick test ride today as I'm getting over flu - feels great, not too harsh at all, low 60s psi will do that!

Very impressed so far, paint is really nice.