Lightcarbon: New LCR017-D (or Yishun R1058-D)

[rasch]

I did tighten it according to the specs (10nm) Even using carbon paste every time and don't notice any movement after putting and removing the top cap.
The part that fits the upper bearing came with the headset and I believe its well positioned else it'd move quite a lot I believe.

Will try to go again for a ride today. Maybe it's because I am used in my bikes to thinner tires and higher tire pressures.

[PLA]

The expander torque is 10Nm?

[rasch]

The expander torque is 10Nm?

Youp
https://www.lightcarbon.com/lightcarbon-super-light-disc-brake-road-carbon-frameset-with-integrated-handlebar_p240.html#parentHorizontalTab022

[PLA]

Jesus OK. Never seen an expander go above 5Nm.

If you have play, just compress everything lightly with a clamp then just nip up the stem on the steerer so it doesn't move, then torque the compression bung up to spec, then torque the stem bolts.

[Da11as]

Hi everyone.
So I am another person tempting to push the button and order the frame. I've read the thread and in several posts regarding superlight frame a very thin carbon layer was mentioned? I am concerned about the areas, as my current bike frame was (as I figured out lately) branded LCR0X and it cracked near seatpost clamp area, on the upper part of the top tube. Having tin foil tubes is generally acceptable (I had some high-end western bikes where this was the case, all is Ok), but it may be the questionable positioning in OEM frame...

Another question for the users is ride quality. I have generally crappy roads in my area and LCR0X ride is quite harsh on both from and rear end, even compared to older aero frames with thinner tires, probably due to seatpost exposure and shape. How's it for LCR017 compared to some other frames?

[rasch]

For me with 32mm tires and carbon wheels (steel spokes) it's the most comfortable (road) bike I have

I'd say it's a very good frame. Just choose the size accurately. I'm 1.90 went for the 58 in 100mm stem and 0 offset seatpost and it's almost too big. Go for crazy colours

And the "play" I have is indeed tire related and not headtube ahaha. Not used to such flex on road bikes. Reminds me of my mountain bike almost ahah.

[repoman]

Hello,

I purchased a LCR017 in June and received it a few months later, paid 712$, a bit less than you because I didn’t ask any customization. Did you request any "z tier" when ordering your frame?
Upon inspecting my frame, I discovered significant voids in the upper seat tube area. I reached out to my sales contact, Carol, regarding this issue but have not received a response yet (WhatsApp and email). I also used the contact form on the Lightcarbon website to inquire about my frame situation.
Just to clarify, I am not seeking for clicks on my YouTube channel, as someone suggested in response to one of my comments on Hambini's video about the same frame model. I simply want to share my experience with the Lightcarbon. Here's the video,
Eventually, I will do another one if Lightcarbon keeps quite about my case.
Thanks Tiago

Wow, that's the worst I've ever seen.  Did they give you a new frame? I wonder how voids like that even happen! It's like the sheet of carbon they used was all torn up when they put it in the mold or something.

[tiagosantos_ss]

Wow, that's the worst I've ever seen.  Did they give you a new frame? I wonder how voids like that even happen! It's like the sheet of carbon they used was all torn up when they put it in the mold or something.

So far only one "automatic reply" saying they are in an autumn festival and will be able to reply back after September 19th

[krzyszfot]

Hi all,

new here but read through the topic, I'm planning on building bike on this frame after hambini's review but after Tiago's adventures i'm being cautious. I'm in touch with Wendy from LC and discussing the details. I hope your case @tiagosantos_ss would be resolved positively. I intend on asking about your case in my email thread specifically.

I also have a q for people that already built a bike on this frame. Does it take Shimano cable operated FD or not? There is no clear answer from this thread. I'm waiting on Wendys response on that.

[rasch]

Yes it does. I have shimano r7020 working

[PLA]

Hi all,

new here but read through the topic, I'm planning on building bike on this frame after hambini's review but after Tiago's adventures i'm being cautious. I'm in touch with Wendy from LC and discussing the details. I hope your case @tiagosantos_ss would be resolved positively. I intend on asking about your case in my email thread specifically.

I also have a q for people that already built a bike on this frame. Does it take Shimano cable operated FD or not? There is no clear answer from this thread. I'm waiting on Wendys response on that.

Please update us with the comms you get regarding the shitty frame.

[rasch]

Please update us with the comms you get regarding the shitty frame.

As i mentioned it works with a 105 mechanical hydraulical. I didn't even need to use the metal plate. Thst one is a bit tricky to put as the seat tube is very thin in that part and you have to workaround it.

Other than that is just like any other frame

[Apone]

After Hambini's review we can expect a incoming price hike....

[neobiker]

Not so sure. They had their gravel frame reviewed and the price was not increased.

[dinorello]

After Hambini's review we can expect a incoming price hike....

You're referring to the Hambini "special" that he got for free?  What's f'd up is that Lightcarbon will ship plenty of substandard frames that there popping out with zero QC to unsuspecting buyers because Hambini sold out.