Author Topic: LCFS948 - a new enduro from Light Carbon  (Read 22066 times)

jefflinde

Re: LCFS948 - a new enduro from Light Carbon
« Reply #60 on: August 18, 2024, 02:43:27 PM »
Both sides broke in the same spot

alexhell

Re: LCFS948 - a new enduro from Light Carbon
« Reply #61 on: August 18, 2024, 03:17:05 PM »
Both sides broke in the same spot

What does lightcarbon say?

repoman

Re: LCFS948 - a new enduro from Light Carbon
« Reply #62 on: August 18, 2024, 04:39:42 PM »
Yikes! The fact that these breaks are in different spots is even more concerning...like the CF they are using or process is bad?

jefflinde

Re: LCFS948 - a new enduro from Light Carbon
« Reply #63 on: August 18, 2024, 05:39:19 PM »
What does lightcarbon say?

Waiting for their full response.  They were super responsive so I want to give them the chance to correct it.  If they have a new rear triangle that would be a great solution.  The frame seems very thin and spindly for the leverage forces that are taking place. 

The rider is about 190lbs and we had to run a 650lb spring to get 30% sag.  This frame is definitely at the limit of the leverage curve.

jefflinde

Re: LCFS948 - a new enduro from Light Carbon
« Reply #64 on: August 21, 2024, 01:19:32 PM »
So I heard back from light carbon on this issue. They are going to replace the frame with the new version or updated version under warranty.  I was given a time frame of middle of October.  I was told they are doing additional testing on the frame and a stronger rear swing arm will be made.  One cool feature is the new version of the frame will have down tube storage under the water bottle mounts.

Not a great situation to be in but I can't really ask for a better resolution from Light Carbon. As it stands I am very happy with the process and excited to see the new frame.  I will post an update when I have more info

michaeldepeza

Re: LCFS948 - a new enduro from Light Carbon
« Reply #65 on: August 24, 2024, 12:06:39 PM »
Hey man happy to hear this....Lightcarbon have been great to me with both my tester frames.....

andrerav

Re: LCFS948 - a new enduro from Light Carbon
« Reply #66 on: August 24, 2024, 07:17:45 PM »
The rider is about 190lbs and we had to run a 650lb spring to get 30% sag. 

I'm 185 lbs and run 450lbs springs on my Rocky Mountain bikes (which have a very favorable leverage curve) and 550 lbs on my Scott Ransom (which has a trash leverage curve). Running a spring on this frame is daring in itself, and running a 650lbs spring on a 190 lbs rider is absolutely bonkers.

alexhell

Re: LCFS948 - a new enduro from Light Carbon
« Reply #67 on: November 02, 2024, 04:00:04 PM »
Anyone heard something from Light carbon? it´s noverber now and not a word. just a broken frame that i cant use..

jefflinde

Re: LCFS948 - a new enduro from Light Carbon
« Reply #68 on: November 03, 2024, 05:40:43 PM »
Anyone heard something from Light carbon? it´s noverber now and not a word. just a broken frame that i cant use..

I ended up going with a different frame which i had asked about.  this was a customers frame and they ended up purchasing a name brand enduro frame while they waited.  So we switched to a 918 XC frame and LC was able to send that right away.  Not sure who your contact is but have you reached out and they have not responded, or you just have not heard from them?  I was told November for the delivery of the new rear triangle for my warranty case.  so i would be surprised if it was ready now.   if you have not done so, i would reach out and ask politely what the status is. 

slaine25600

Re: LCFS948 - a new enduro from Light Carbon
« Reply #69 on: November 20, 2024, 12:59:00 AM »
hello, do you have news about the new rear triangle?