LTWOO eGR

[MrMojo93]

IF you want to go ahead with a wide-range rear cassette and/or "clutch" like on the eGR RD, I think that's probably the way to do it.

What you need to do it is the dual-port battery that comes with the road group. The eGR version only has a single port to power the RD. Getting the road set would include that and the shifters/brakes. And then you need the eGR or MTB RD. Supposedly LTWOO will support pairing across product lines. Confirmation on that seems thin though. If I get a chance at Sea Otter I'll try to remember to ask someone.

I have wrote to the official LTWOO support, they said that eGR does not support a FD, Tracevelo said that the brain of the operation is the RD, but I don't think that the inside electronics are so different than the eRX. I might try to ask him to test this, he has every LTWOO electronic groupsets.

Why do you think that it would be better to buy an eRX groupset and an eGR RD? Apart from that, that I would surely have a working 2by system, but I would like to have the eGR brifters, they might be better optimized for gravel.

Thanks! That would be great if someone could verify that this actually works

[amacal1]

 but I would like to have the eGR brifters, they might be better optimized for gravel.

Thanks! That would be great if someone could verify that this actually works

1) I'm actually not sure about which brifters would be better. I find the eGR brifters to be uncomfortable. They're thinner and have hard rubber. The combo makes them hard on my hands. The only thing that might be improved is weather sealing (no real indication, just a guess) and the button response (confirmed that eGR is 'click-ier' while eR9 is 'soft-er'). I believe the new eR9 v2/3 brifters are reported to be fatter and more comfortable while also having the more tactile 'clicky' buttons.

2) If you dig through either this thread or the eR9/eRX thread, you should find that someone has already tested (minimally) and found it works. I don't recall that they actually ran the system to flush out any potential issues, only that they paired various brifters, FD, and RD combos to confirm that all the various pieces and parts communicated and the FD shifted while paired with the eGR RD.

[jonathanf2]

1) I'm actually not sure about which brifters would be better. I find the eGR brifters to be uncomfortable. They're thinner and have hard rubber. The combo makes them hard on my hands. The only thing that might be improved is weather sealing (no real indication, just a guess) and the button response (confirmed that eGR is 'click-ier' while eR9 is 'soft-er'). I believe the new eR9 v2/3 brifters are reported to be fatter and more comfortable while also having the more tactile 'clicky' buttons.

2) If you dig through either this thread or the eR9/eRX thread, you should find that someone has already tested (minimally) and found it works. I don't recall that they actually ran the system to flush out any potential issues, only that they paired various brifters, FD, and RD combos to confirm that all the various pieces and parts communicated and the FD shifted while paired with the eGR RD.

I add extra bar tape on the top section of my LTwoo shifters to make them more comfortable. Also I'll take the eGR brifters over the V1 ER9/X. The haptics on the eGR shift buttons are way better and the brake lever tips are slightly longer, making them easier to use in the drops.

[trcycling]

Why do you think that it would be better to buy an eRX groupset and an eGR RD? Apart from that, that I would surely have a working 2by system, but I would like to have the eGR brifters, they might be better optimized for gravel.

On the requirement to have the dual port battery and FD which are available in the eRX group. So, if the groupset is buyable cheaper than the parts (often the case), that would be efficient. But you could also get eGR and buy a second battery from the eRX group with dual ports and an FD. But that brings up the 'does it really work' with eGR brifters question again. I would have greater confidence (but still unknown) that the eRX 2x setup could talk to an eGR wide-range RD than the eGR 1x brifters (which officially allow you to use left or right to shift the RD but no other combo) to be able to also control the FD. The way pairing works on LTWOO and other wireless systems, it appears that the RD is the master in the system and thus could be the deciding factor in cross comopatibility.

[MrMojo93]

I thought about it, and I think now is the time to go for a 1by setup. I will buy a PG-1230 11-50 cassette and a 40t front chainring.
But now I'm torn between wheeltop and ltwoo. Ltwoo would be better for my smaller hands and more adjustable for sure, I like the changeable battery. Does the braking feels like Shimano with Ltwoo as well? I like that.
Wheeltop on the other hand surely supports up to 52t big cog. And there is Ltwoo wierd adapters, I have a Rockshow rudy fork, so I hope that a back adapter should be fine with the front caliper for 180 mm rotor, just like shimano (SMMAR160DDA)
What do you think?

[amacal1]

I thought about it, and I think now is the time to go for a 1by setup. I will buy a PG-1230 11-50 cassette and a 40t front chainring.
But now I'm torn between wheeltop and ltwoo. Ltwoo would be better for my smaller hands and more adjustable for sure, I like the changeable battery. Does the braking feels like Shimano with Ltwoo as well? I like that.
Wheeltop on the other hand surely supports up to 52t big cog. And there is Ltwoo wierd adapters, I have a Rockshow rudy fork, so I hope that a back adapter should be fine with the front caliper for 180 mm rotor, just like shimano (SMMAR160DDA)
What do you think?

If waiting is an option, the new Ltwoo eGR version is supposed to have a larger max cassette capacity. Also, their new MTB derailleur looks interesting, especially since it seems it likely pairs with their road and gravel brifters.

[trcycling]

I actually own both LTWOO and Wheeltop on two different bikes. A few notes


- The Wheeltop officially supports 51 not 52. I suspect that 52 would work but, then again there may be a reason they topped it there

- LTWOO has a new RD that DOES work well up to at least 50t. I got it on warranty (charging problems) and they asked if it was ok to send the long cage version (8-9mm longer as it turns out) instead. Heck yeah, I said since I was using the 50t already out of spec. They did not provide any documentation on the new version and I find NOTHING online and there are no markings. So...  But it seems clear that there is a new version working into the system and that it supports bigger cassettes. How big? Is it a configuration option or a replacement version? Did anything else change? I don't know. It works well. Better than the original it seems to me.

- The LTWOO strange caliper adapter thing is not great. But seems to work with most. Wheeltop calipers just flat mount with no issue

- Braking feel is kind of a wash. My opinion is problematic because I couldn't use the LTWOO calipers on the first install because of having a post mount bike (I had been led to believe I could just use different adapters. No). So I just used some Shimano calipers which worked great but not exactly stock. When I swapped in the Wheeltop system, I left the Shimano calipers (easier to just couple in than re-thread the hoses) and that worked fine too.  When I re-used the LTWOO again on the second bike, I ended up using the Wheeltop calipers  because they mounted without adapters. So.... It all works. Braking feel and effectiveness is good on both mutt systems. The pads that come with the Wheeltop are bad if you're heavy and/or ride mountains. They feel good riding in unchallenging areas but they melt way too easily on a long descent. I have resin pads on another bike that works fine and these did not. I put metallics in there and it's good now.

[Dr J]

I thought about it, and I think now is the time to go for a 1by setup. I will buy a PG-1230 11-50 cassette and a 40t front chainring.
But now I'm torn between wheeltop and ltwoo. Ltwoo would be better for my smaller hands and more adjustable for sure, I like the changeable battery. Does the braking feels like Shimano with Ltwoo as well? I like that.
Wheeltop on the other hand surely supports up to 52t big cog. And there is Ltwoo wierd adapters, I have a Rockshow rudy fork, so I hope that a back adapter should be fine with the front caliper for 180 mm rotor, just like shimano (SMMAR160DDA)
What do you think?

I thought wheeltop were for small hands, and thought the ltwoo were better for larger hands?

[MrMojo93]

If waiting is an option, the new Ltwoo eGR version is supposed to have a larger max cassette capacity. Also, their new MTB derailleur looks interesting, especially since it seems it likely pairs with their road and gravel brifters.

Thanks, I think I will wait for now, 80 Desinger store answered me and said that the new eGR will be available in the end of the month.
I have one more question, Wheeltop has a specific interface with UDH hangers, does LTWOO have something similar?

[jonathanf2]

I have one more question, Wheeltop has a specific interface with UDH hangers, does LTWOO have something similar?

No, they're similar to Shimano using something similar to the shadow derailleur hanger design. I tried setting up a Shimano direct mount hanger on my UDH bike and the LTwoo RD wouldn't fit on a Shimano specific DM hanger. It's slightly different.

[MrMojo93]

No, they're similar to Shimano using something similar to the shadow derailleur hanger design. I tried setting up a Shimano direct mount hanger on my UDH bike and the LTwoo RD wouldn't fit on a Shimano specific DM hanger. It's slightly different.

So just have attach it to the hanger directly? Does that work fine?

[helloitsme]

Did anyone get the issue where you can't shift to the larger gears while on battery?
My egr just squeak and turn itself off whenever i do that. I assume it needs more energy to shift to large cogs.
If i plug it into the wall then shifting is fine. Shifting to smaller cogs with battery is also fine.
I suspected low battery and the app just report the wrong battery level at 100% so i left it overnight but didn't work.

[jonathanf2]

Did anyone get the issue where you can't shift to the larger gears while on battery?
My egr just squeak and turn itself off whenever i do that. I assume it needs more energy to shift to large cogs.
If i plug it into the wall then shifting is fine. Shifting to smaller cogs with battery is also fine.
I suspected low battery and the app just report the wrong battery level at 100% so i left it overnight but didn't work.

I highly recommend getting a separate battery charger and charging the batteries before installing it into the battery holder. Also clean the connectors periodically as well. I find my eGR port needs to be cleaned more often than my eR9 setup.

[MrMojo93]

IF you want to go ahead with a wide-range rear cassette and/or "clutch" like on the eGR RD, I think that's probably the way to do it.

What you need to do it is the dual-port battery that comes with the road group. The eGR version only has a single port to power the RD. Getting the road set would include that and the shifters/brakes. And then you need the eGR or MTB RD. Supposedly LTWOO will support pairing across product lines. Confirmation on that seems thin though. If I get a chance at Sea Otter I'll try to remember to ask someone.

Can you provide more info on the MTB electric RD?

[Phaxe]

My patience for this group set is wearing thin.

When bleeding the front brake, despite using the right tool, somehow that little grub screw in the lever got jammed in the threads and it’s stripped. Then the springs holding lever mechanism fell apart so I’m left with a bunch of springs and a jammed grub screw. Are there schematics for how these are put together so I can reassemble? Can I run the brake with no grub screw?

I’m wondering if biting the bullet on a new shifter might be easier.