New Gravel Frame Ican Graro

Started by Donramon94, February 24, 2024, 03:26:43 AM

Previous topic - Next topic

Peter_PL

Quote from: Zebomat on September 30, 2026, 10:55:01 AM
Which chainring did you end up using here? Looks cool.

its polish product - ALUGEAR Aero Round 44T

oker_s

Tried out Tufo Thundero 48mm which are measuring 49mm on my rim. Plenty of Space on Fork an Seattubes...Only Place which is getting a bit closer is chainstays with about 5-6mm in each side...but this should be fine!

so the official tire width is a bit pessimistic and up 50mm should be fine

Peter_PL

Quote from: oker_s on October 02, 2026, 09:54:58 AM
Tried out Tufo Thundero 48mm which are measuring 49mm on my rim. Plenty of Space on Fork an Seattubes...Only Place which is getting a bit closer is chainstays with about 5-6mm in each side...but this should be fine!

so the official tire width is a bit pessimistic and up 50mm should be fine
I have Caracal Race tires and they measure 50.8 mm on these wheels (32IW)
I'm planning to put Thunder Burt 2.1 on for the autumn period. I don't ride in the mud anyway, and when I measured, there was still room. I also measured Dubnital 2.0, but they're again tall like MTB tires and so-so. Schwalbe is about 53mm on these wheels.

Zebomat

#168
Whats the max torque for the compression plug/expander  in the steerer tube?
The ican youtube channel mechanic torqued it to 14 nm.
https://www.youtube.com/shorts/Bb5xpq8Zop8