Speeder Cycling SC-R55D

[Nihilo]

I have schwalbe pro one 30mm on 26mm internal rims. They measure 33mm. Fork is super wide can probably take 40mm, same as seatstays. Chainstays are the narrowest point but there's still a bit of room. I think 35 should fit.

pavlo, much appreciated! That chainstay part looks pretty tight but this isn't a gravel bike, think it's fine.
Waiting for your full build and review.
Cheers

[pavlo.k]

pavlo, much appreciated! That chainstay part looks pretty tight but this isn't a gravel bike, think it's fine.
Waiting for your full build and review.
Cheers

it's 4mm of clearance on either side so well within acceptable.

the build is almost done. only need to install the bb and cranks and bleed the brakes

[Nihilo]

it's 4mm of clearance on either side so well within acceptable.

the build is almost done. only need to install the bb and cranks and bleed the brakes

It looks cool with those deep section wheels

[pavlo.k]

My build is ready.
Built with ltwoo er9 groupset and wheels from Peter
Weight with pedals and bottle cages is 7.7kg which is not the lightest but considering the size and a very deep rims it's not too bad. I originally installed riro carbon cranks but the chainrings  turned out to be warped so I'm waiting for a replacement to arrive. With riro cranks the weight is getting close to 7.5kg

[tgarne]

My build is ready.
Built with ltwoo er9 groupset and wheels from Peter
Weight with pedals and bottle cages is 7.7kg which is not the lightest but considering the size and a very deep rims it's not too bad. I originally installed riro carbon cranks but the chainrings  turned out to be warped so I'm waiting for a replacement to arrive. With riro cranks the weight is getting close to 7.5kg

65s from Peter? what do they say on the scale?

[pavlo.k]

65s from Peter? what do they say on the scale?

These are their new ultra wide rims (26mm internal) with their in-house hubs and pillar 1420 spokes weight is 1498g