Author Topic: Wheeltop EDS GeX  (Read 269615 times)

kb_79

Re: Wheeltop EDS GeX
« Reply #300 on: June 30, 2026, 02:28:15 PM »
To have the race mode on the wheeltop derailleurs and the standby you must activate the race mode via this site which makes the link with the derailleur
https://dreds.jeckyll.net/
https://git.jeckyll.net/published/personal/eds-ox/-/blob/main/README.md

RiP

Re: Wheeltop EDS GeX
« Reply #301 on: July 16, 2026, 05:57:58 AM »
Does anyone know if the derailleur cage from the MTB OX/OX2.0 is compatible with the GeX derailleur too? Looking at pictures it seems so, but maybe someone around here knows the answer...  8)

LiGuangming1981

Re: Wheeltop EDS GeX
« Reply #302 on: July 21, 2026, 07:03:32 AM »
Just installed GEX on my new Waltly titanium minivelo. Using a 13 speed 11-45 cassette from Sunshine. Setup was relatively painless, and shifting is good so far. Hope it continues this way.


Damix

Re: Wheeltop EDS GeX
« Reply #303 on: August 14, 2026, 05:53:50 AM »
Can You tell me what chain are you using with this cassette?

dolph

Re: Wheeltop EDS GeX
« Reply #304 on: August 14, 2026, 08:16:57 AM »
Use *any* chain compatible with your cassette and chainring.

Tsunami

Re: Wheeltop EDS GeX
« Reply #305 on: August 17, 2026, 02:06:49 AM »

    I bought my Wheeltop EDS GeX Gravel 1x12 in July 2025 via AliExpress. Until the failure, I was actually quite happy with the groupset.

    At the beginning of August 2026, the right shifter failed. The two buttons are no longer recognized separately. No matter how I assign them in the app, both buttons always perform the same function. The shifter is still detected correctly, the batteries are new, the firmware is up to date, I re-paired everything, performed a reset. The problem remains fully reproducible. I also sent Wheeltop videos showing the problem.

    I contacted Wheeltop but the response was simply: warranty expired. Yes, but by like 5 days. No exceptions, no goodwill gestures, they still didn't even attempt to analyze the technical problem.

    No proper troubleshooting, no further assistance, no offer of a replacement shifter. Basically: buy a new groupset.

    I actually liked the groupset itself. But what's the point of an affordable electronic groupset if a single shifter fails after just over a year and the manufacturer shows no interest in helping to resolve the problem?

    Based on this experience, I cannot recommend buying a Wheeltop groupset. I would rather spend more on Shimano or SRAM and have proper spare parts availability and customer support.

    It's a shame, because I actually found the product concept very interesting.

Tsunami

Re: Wheeltop EDS GeX
« Reply #306 on: August 17, 2026, 02:08:05 AM »
Hi everyone!

I’m having an issue with my Wheeltop EDS GeX Gravel 1x12 and wanted to ask if anyone has experienced something similar or knows of a possible solution.

Unfortunately, Wheeltop hasn’t been very helpful so far. I reported the problem with videos and a detailed description, but apart from telling me that the one-year warranty had expired, there was no technical analysis, troubleshooting, or offer of a replacement shifter. In the end, I was basically told to buy a new groupset.

The problem is with the right shifter:

Both buttons are no longer detected separately.
I can change the button assignment in the app, but both buttons always perform the function assigned to the small button.
Example: large = “+”, small = “−” → both shift “+”.
If I swap the assignment: large = “−”, small = “+” → both shift “−”.
The shifter itself is detected normally in the app.
The current gear position is also displayed correctly.
Shifting via the app works normally in both directions.

I have already tried:

Replacing both shifter batteries (3.3 V)
Updating the firmware
Re-pairing the shifters
Resetting the system
Resetting and testing the button assignments several times

Does anyone have any idea what could be causing this? Maybe someone has experienced a similar problem or knows whether the shifter can be reset/relearned separately, or whether this sounds more like a hardware failure?

Thanks!

Bambelbie

Re: Wheeltop EDS GeX
« Reply #307 on: August 17, 2026, 03:44:42 AM »
not sure, I had a similar issue with the "normal" EDS-shifter on the right side.
cannot remember if it was exactly the same but try this:

try cleaning the gap between the two paddles.
take a small tissue and clean in between...I had some small debris there and after removing it, everything was well again.

hope that's helping!

bus4@207

Re: Wheeltop EDS GeX
« Reply #308 on: August 21, 2026, 11:33:17 AM »
Just come across a problem with my lever.
Brakes had gone very soft and went to do a bleed and fresh fluid.
Kept getting loads of air coming through at the brake rotor end. Then I noticed dripping from below the lever. Up on the plug was dry but underneath the lever was dripping fluid. Possibly a seal gone? Fixable or just order new shifters?
Thanks