Xiamen Carbon Speed rims/wheels

[Lotnik]

Anyway hubs are in the center of rotation so they not much affect on rotation mass. 50 grams +/- on the hub doesn't effect anything beside the complete weight of the wheelset.

[PeterXu]

Anyway hubs are in the center of rotation so they not much affect on rotation mass. 50 grams +/- on the hub doesn't effect anything beside the complete weight of the wheelset.

If the material used for hub body is not so good, it might cause tension deformation on the sopke holes hub side because of high tension on carbon spokes, and even the breadth deformation in center of the hub body, carbon spokes might not be reused when you get quality problem on the hubs, that is why we don't suggest too light hubs used for carbon spokes if they are cheap as ours. Unless you use very good material to make the hub bodies meanwhile make them extremely light and stable quality, but they would be much more expensive though.

[Uberflo]

My wheelset from Peter ist ready 2 ship: https://imgur.com/a/gE4y7BS

[patliean1]

My wheelset from Peter ist ready 2 ship: https://imgur.com/a/gE4y7BS

Sheeeesh! 1315g for a set of 65mm deep is wild.

[Vaclav]

My wheelset from Peter ist ready 2 ship: https://imgur.com/a/gE4y7BS

I have the exact same setup. Also ready to send. Mine have 15g more

[Bobinski]

Hi,
I am just about to order these-D50CU-33 T1100 wheels UD paintless 20/20H built with carbon spokes and in-house hubs 54T rachets TPI ceramic bearing.Sram XDR for use on a xplr groupset. I am asking for rim tape to be fitted. Anything else i should be thinking about? TIA! Bob

[j4m1eb]

My wheelset from Peter is ready 2 ship: https://imgur.com/a/gE4y7BS

Mine too, although I went for 50mm
https://imgur.com/a/xIzGMzh

[j4m1eb]

Hi,
I am just about to order these-D50CU-33 T1100 wheels UD paintless 20/20H built with carbon spokes and in-house hubs 54T rachets TPI ceramic bearing.Sram XDR for use on a xplr groupset. I am asking for rim tape to be fitted. Anything else i should be thinking about? TIA! Bob

I got a couple of spare spokes too. I was told I had to fit the rim tape myself?

[KaiDeus]

Applying rimtape isn't hard, take it as an opportunity to learn. Just take your time with it. There is enough tape on a roll to be able to mess up.

[j4m1eb]

Applying rimtape isn't hard, take it as an opportunity to learn. Just take your time with it. There is enough tape on a roll to be able to mess up.

Yeah it's fine I've done it many times. I was just saying that I doubt they will fit at the factory

[Bobinski]

I got a couple of spare spokes too. I was told I had to fit the rim tape myself?

Good shout re the spokes. I assumed they would throw a few in but i will ask.

[maza]

Does Cabon Speed have the tension specs for the spokes? Unlike steel all carbon spokes are unique to the model and layup and cannot be tensioned according to any table. What readings should we go for when tensioning with Park Tool TM-1?

[Bobinski]

I ask Pete about integrated bars and he has offered a 38/90 at a great price. I can’t find any user reviews- anyone here used them?

[Bobinski]

Hello everyone,
First of all many thanks for all your efforts on the forum, it's great and helps me a lot - keep up the good work.

Based on your experiences and reports I have ordered a wheelset (and handlebar) from Peter. And I can and will pass on your opinion - it was a great experience and the products are really very, very high quality products. Peter helped me a lot, even when my questions were annoying, he always answered immediately and helped me - thank you!

For the wheels I ordered the new D50CU-33 T1100 rims with carbon spokes and Peter's in-house hubs. Weight 1,225 gr. The plan is to use 30mm tyres. When I have fitted them I can give an update on the actual width of the tyres if you are interested.

I am also happy with the integrated handlebars, I just have to look for suitable spacers.

Hi
How did you get on with the handlebars? What was the spacer issue? Been offered 38/90 at a good price by Peter with my wheel order and not sure whether to bite or look elsewhere. Thanks. Bob

[IL_EH_75]

Hi,

Which carbon fully integrated handlebar did you order from Peter?
In the website they have just one model, I don't know if they can supply different one.