WINOWCYCLE NEW Carbon TT Rest Extension Handlebar ARB02 and TT handlebar HB052

[cnoble87]

Has anyone purchased these aero bars to mount on a road bike? Trying to find a more cost effective method than Deda bracket used on the Deda Jet bars as €160 feels very expensive, have added a photo. I had planned to use my profile design bracket from my existing aero bars, but the angled adapter also worked out very expensive to have custom machined. @winowsports any plans to produce something similar?

[mattgolt]

Hi Kitty,

do you ever plan to make an XL Variant of the Armrests ARB02? I'm almost 190cm tall and have long and slender arms. FastTT would recommend me to take their XL variant, but your L seems a lot smaller than this.

KR

[johnnyboy4711]

Hi kitty,
any news on the new bars you are advertising on instagram?

[don]

Hi Kitty, do you have a dual water bottle extension/bracket for the Winow bars? The single one is ok but dual would be better and at a horizontal angle?
Also is there any Wahoo computer side extension bracket to bolt onto the two screw holes underneath on the right hand arm?
thanks

[Kitty_BIKE]

Has anyone purchased these aero bars to mount on a road bike? Trying to find a more cost effective method than Deda bracket used on the Deda Jet bars as €160 feels very expensive, have added a photo. I had planned to use my profile design bracket from my existing aero bars, but the angled adapter also worked out very expensive to have custom machined. @winowsports any plans to produce something similar?

There are currently no designs.

[Kitty_BIKE]

Hi Kitty,

do you ever plan to make an XL Variant of the Armrests ARB02? I'm almost 190cm tall and have long and slender arms. FastTT would recommend me to take their XL variant, but your L seems a lot smaller than this.

KR

Currently only available in sizes M/L, size S is planned.

[Kitty_BIKE]

Hi kitty,
any news on the new bars you are advertising on instagram?

It is expected to take more than a month.

[Kitty_BIKE]

Hi Kitty, do you have a dual water bottle extension/bracket for the Winow bars? The single one is ok but dual would be better and at a horizontal angle?
Also is there any Wahoo computer side extension bracket to bolt onto the two screw holes underneath on the right hand arm?
thanks

We don't have a dual water bottle extension/bracket.
We do have an 88mm length computer mount, but some computers don't fit.
Link：https://www.aliexpress.com/item/1005008168402345.html

[Kitty_BIKE]

I will make a new post when the new aero handlebars are available. Stay tuned to WINOWCYCLE.

[merider]

https://www.instagram.com/p/DOIfTtqjxTV/?igsh=aDZ0ZnNxZWc2czI5

https://sites.google.com/view/winowcycle/

$400
more expensive than expected

[Aradell]

https://www.instagram.com/p/DOIfTtqjxTV/?igsh=aDZ0ZnNxZWc2czI5

The computer mount also looks quite wide, this doesn't really allow for a narrow arm position.

[klindsey00]

https://www.instagram.com/p/DOIfTtqjxTV/?igsh=aDZ0ZnNxZWc2czI5

https://sites.google.com/view/winowcycle/

$400
more expensive than expected

Yeah definitely, Not sure why it would be double the price of ARB02. Still way cheaper than the actual aerocoach bars though.

[Kitty_BIKE]

Final prices have been confirmed. Offline prices: ARB03: $413, HB053: $623.
AliExpress retail prices will be slightly higher than this.

[Cnasta]

I'm ready to order the ARB02 extension + angles spacers (20 degrees) + computer mount. I'm really in doubt between M and L. Maybe someone can help:

I 'm 178cm tall
My elbow to first joint of the pinkie = 32,5/33cm. Kitty thinks I should go for size M. Both 33cm and 178 are in between the M and L measurements. I prefer 'snug' over 'too much room' and love a tight fit. I hate extentions which do not follow the form of the underarm. On the other hand, too small woud suck.

Is there anybody that can confirm: size and measurements fromelbow to first joint of pinkie?

Even better if there is somebody in The Netherlands (or nearby in Germany) where I could try the extentions

Last: I will fit them tot a 2018 Giant Trinity with FastTT baseplate and angled spacers. Baseplate is needed to bold spacers to, and to fit high stack BTA solution. I'm forgetting something here?

Final remark: until now Kitty is very helpfull in the proces!

[johnnyboy4711]

medium