Author Topic: Spcycle New Mold SP-R088 Carbon Road Frame  (Read 935446 times)

gyhu

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #1035 on: December 05, 2025, 04:20:03 PM »
Yeah just the frame, so I'm unsure about what to get next to actually build up the bike with. I can buy the integrated handlebar I linked in my previous post as it is compatible, but wondered what others I could go with. What size is the steerer tube?

I've seen this linked in a previous post on an earlier page, seems okay? KOCEVLO X01 Road Bike Full Carbon Fiber Stem Integrated Bicycle Handlebar For 28.6mm With Spacers Cycling Parts Accessories. It only allows free shipping, so I guess when it hits UK customs I'm liable to pay import duty?

Another question, in guessing it’s not got the rubber bungs included for the internal cable routing, for when the cable comes out of the frame?

Lastly, as I've just put the order in on AliExpress, would they contact me next week about my preferred colour?

Link from your previous post doesn't work for me. You can find in this thread few examples of handlebars used with this frame. I don't have actual dimensions but most headsets with round top cap 56-58 mm should be ok. I'm not familiar with UK import duty. Rubber bungs are not included but you may not need them.  I think is better to specify your expectations about the color as soon as possible. I did it in the message after putting the order.

Russ68

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #1036 on: December 07, 2025, 08:50:10 AM »
Yeah just the frame, so I'm unsure about what to get next to actually build up the bike with. I can buy the integrated handlebar I linked in my previous post as it is compatible, but wondered what others I could go with. What size is the steerer tube?

I've seen this linked in a previous post on an earlier page, seems okay? KOCEVLO X01 Road Bike Full Carbon Fiber Stem Integrated Bicycle Handlebar For 28.6mm With Spacers Cycling Parts

I thought it wise the buy the frame with integrated bars to ensure as much compatibility as possible. If SPC haven’t shipped, you might be able to add bars to your order. Similarly, you can pay extra for ddp shipping which sorts out UK duties. Their comms are ok so drop them a message😉
Accessories
. It only allows free shipping, so I guess when it hits UK customs I'm liable to pay import duty?

Another question, in guessing it’s not got the rubber bungs included for the internal cable routing, for when the cable comes out of the frame?

Lastly, as I've just put the order in on AliExpress, would they contact me next week about my preferred colour?

Russ68

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #1037 on: December 07, 2025, 06:11:09 PM »


You might be lucky re duty / UK VAT. I decided not to risk it and added ddp shipping after comms with SPC. Have you logged into AliExpress messages? This is where to discuss shipping and frame finish if you haven’t already. I think you should add bars too. Only extra £60 or so from memory and good chance it’ll have headset spacers and other things you may need 😉

HarryFunmaker

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #1038 on: December 09, 2025, 10:25:42 AM »
Yesterday I hit 1,000 miles (1,600 km) on this frame and I'm still pleased with the purchase. The thing that stands out to me is how well this bike handles. It's not twitchy, but much more responsive than my previous bike, which steered a bit like a truck. Yesterday I had to dodge a pothole in a corner at the last second, which felt effortless. I would have felt like I was wrestling my old bike in that scenario.

It's not as aero as some of the other frames coming out of China these days, but a lot of those frames are also getting a lot more expensive. I consider this frame to be a very good value for the money and chasing better aerodynamics would result in diminishing returns, as far as I'm concerned. Not to say that I'm against anybody else chasing those gains, it's just not my preference right now.

I'm so glad that frames like this exist. Stuff is getting crazy expensive these days, but you don't need to spend a ton of money to have fun on a bike. So far I'm happy with my decision to go this route as opposed to the used market. I got the handlebar/stem size I wanted, the crank length I wanted, lighter wheels than would have come with a used bike, etc.

My next bike will be built for a bike tour and I'll definitely be buying direct from China again.

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #1039 on: December 09, 2025, 01:09:44 PM »
You might be lucky re duty / UK VAT. I decided not to risk it and added ddp shipping after comms with SPC. Have you logged into AliExpress messages? This is where to discuss shipping and frame finish if you haven’t already. I think you should add bars too. Only extra £60 or so from memory and good chance it’ll have headset spacers and other things you may need 😉

After sleeping on it overnight I cancelled my order and I got a second hand Winspace frame.

Russ68

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #1040 on: December 17, 2025, 04:03:41 AM »
My R088 arrived yesterday and it was both beautifully wrapped and finished. I love the clear gloss over raw carbon finish, and I love knowing I saved weight with this  :)

I have a slight concern that my 54cm actually has a 48cm seat tube. Measured BB centre to top. I did study the frame geometry before buying, mainly to make sure the Reach was correct, and it hadn't registered that the seat tube ends up a long way short of what would be thought traditional.

Has anyone had any issues with this? Sizing or flex etc? I measured 3 of my other road bikes and in all other respects the other dimension are coming up just as I'd expect. I thought I'd be sent the wrong size originally but I'm pretty sure I can make this work! I'll just be showing even more seat post than normal, and I normally show a lot! 200mm etc ???

asdrubal888

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #1041 on: December 17, 2025, 05:27:03 AM »
Guys,

What is your size suggestion for 172 cm and 81 cm inseam? Hesitate between 49 (with 10 cm stem) and 52 (shorter stem I guess).

Can anyone share pics of ready bike in size 49?

Suikerbroer54

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #1042 on: December 17, 2025, 06:34:11 AM »
My R088 arrived yesterday and it was both beautifully wrapped and finished. I love the clear gloss over raw carbon finish, and I love knowing I saved weight with this  :)

I have a slight concern that my 54cm actually has a 48cm seat tube. Measured BB centre to top. I did study the frame geometry before buying, mainly to make sure the Reach was correct, and it hadn't registered that the seat tube ends up a long way short of what would be thought traditional.

Has anyone had any issues with this? Sizing or flex etc? I measured 3 of my other road bikes and in all other respects the other dimension are coming up just as I'd expect. I thought I'd be sent the wrong size originally but I'm pretty sure I can make this work! I'll just be showing even more seat post than normal, and I normally show a lot! 200mm etc ???

I have ordered r088 on November 29th, it is currently on its way to me. Very excited to receive it. Have ordered a 54 size for 1777 cm length. Now I am riding a 56 frame that feels a bit big for me. they have told me that it has SPcycle loge on it.

Russ68

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #1043 on: December 17, 2025, 08:37:02 AM »
Guys,

What is your size suggestion for 172 cm and 81 cm inseam? Hesitate between 49 (with 10 cm stem) and 52 (shorter stem I guess).

Can anyone share pics of ready bike in size 49?

I've found shorter stems can make descending a bit twitchy, so I'd suggest the 100mm stem and work back from there, hence the 49 perhaps? SPC will also advise you  ;)

Russ68

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #1044 on: December 17, 2025, 08:41:27 AM »
I have ordered r088 on November 29th, it is currently on its way to me. Very excited to receive it. Have ordered a 54 size for 1777 cm length. Now I am riding a 56 frame that feels a bit big for me. they have told me that it has SPcycle loge on it.

I hope that works out for you, it sounds reasonable. My 1st modern road bike was a 56cm, but I was always stretched on it, ended up with an 80mm stem and bars angled up. So I've been on a 54cm ever since and the 1st geometry stat I look for is reach. The R088 was perfect in this regard.

Suikerbroer54

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #1045 on: December 17, 2025, 08:46:24 AM »
Planning to build my bike with a Ltwoo ER7 groupset and Elite ENT 2.0 wheels. They were all on massive discounts at Black Friday sales.

Yunglord

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #1046 on: December 17, 2025, 08:49:33 AM »
Guys,

What is your size suggestion for 172 cm and 81 cm inseam? Hesitate between 49 (with 10 cm stem) and 52 (shorter stem I guess).

Can anyone share pics of ready bike in size 49?

This will depend on your flexibility but I'm similar to you here except 82cm inseam and I ride a 52 SL7 with a 120mm stem and saddle at 705 mm from BB with enough seatpost showing.


alfiomotrambo

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #1047 on: December 17, 2025, 10:28:16 AM »
Planning to build my bike with a Ltwoo ER7 groupset and Elite ENT 2.0 wheels. They were all on massive discounts at Black Friday sales.

I went for the Elite EDGE https://it.aliexpress.com/item/1005004767705476.html little bit more expensive than ENT 2.0 but after 7000km they hold pretty strong, no complain at all for 1300g

Rajmundx

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #1048 on: December 18, 2025, 08:27:17 AM »
A question for users who have used DEDA stems and handlebars. What type of compression ring did you use? I received a gray one from DEDA, but it's too high.

Russ68

Re: Spcycle New Mold SP-R088 Carbon Road Frame
« Reply #1049 on: December 21, 2025, 02:35:26 AM »
After starting my build my impressions are this is an excellent frame! Nice engineering and very light. But I think I have got my sizing wrong and I’m talking to SPC about a replacement 56cm. The extra 20mm seat tube will help with a similar addition to reach, which I can cope with. Thinking the 58cm is too big with 35mm more reach. I’ll sell on the 54cm rather than send it back 🤔

Initial impressions of the 380/100 bar combo is it’s a lightweight, attractive unit with well thought out spacers and cable routing, but I’m finding the position a bit weird. I’ll try it out in the turbo and see if I can get used to it 🤞