ICAN TT017 TT Bike Build

[Txa1919]

Si!

Entonces hay una versión más ligera, dentro de la misma marca.

[Txa1919]

Can we have more details on the lightweight version?

No tengo más detalles, simplemente me ha dicho que ahora es el que tiene disponible, pero me llama la atención que en la web no veo esa versión ligera, y la forma de flexar que tiene el tubo. Aunque si me lo enseña en un vídeo supongo que será normal

[Triexpress]

Does this frameset come with different riser height blocks and/ or angled spacers? Really tempted with this frame, but the possibility of a one off monoriser system gives me cause for concern. What all came in the box when it was delivered?

Yes. Different height blocks come with the bike. There are 2 different angles too. I have 15 degree extensions plus the 15 degree angle on the riser

[Triexpress]

Some pictures of the bike in action at Ironman 70.3 WC Marbella.

During the race I passed the same bike but the Quick Pro TT:ONE. I cant work out what the connection is with the ICAN TT017 and Quick Pro TT:ONE is. Copy? Shared design?
I didn't see any other ICAN's, most were your usual TT bikes

[IslandRider]

Thanks for sharing those photos of your race! How did the bike handle that course? Any standout pluses or minuses, or neutral?

[stino77]

Some pictures of the bike in action at Ironman 70.3 WC Marbella.

During the race I passed the same bike but the Quick Pro TT:ONE. I cant work out what the connection is with the ICAN TT017 and Quick Pro TT:ONE is. Copy? Shared design?
I didn't see any other ICAN's, most were your usual TT bikes

Cool!

update here: Winow Extensions arrived and finally got my rotor BB also available. So this weekend, continue the build process...

[Triexpress]

Post some pictures of the build.
Did you get the new version of Winow bars?

[stino77]

Post some pictures of the build.
Did you get the new version of Winow bars?

I will!! Hopefully this weekend completed.
No, just the 'older' version. New ones are more expensive. So had to stay within a budget. ;-). And the Winow bars had good comments so...

[stino77]

Some quick pictures of the build, still in progress but we are getting there ;-). Still need to adjust the fit measurements and install the SRAM Blip mounts on the extensions. Ah, and don't forget my chain ;-)

[Triexpress]

Nice!
Do you have some close up’s of the mods you made for the aero bars?

[stino77]

Nice!
Do you have some close up’s of the mods you made for the aero bars?

For the moment no mods made. This weekend more finishing work. I think I just gonna cut the original base plate because normally going to use the winow extensions always.
But first fit the extensions, spacers with correct bike fit measures before doing any modifications...

[j4son]

Interested in getting a frameset, but that front end is holding me back...

Would a Vision Metron TFA Basebar be compatible on the front end? https://shop.visiontechusa.com/en/aerobars/triathlon-time-trial/metron-tfa-evo-base-bar

[Txa1919]

Hoy me ha llegado el cuadro y me he puesto con el montaje, me ha sorprendido los acabados, me ha gustado mucho. El problema me ha venido con la pinza delantera mecánica, al estar integrada, la pinza pega con la horquilla.

[Triexpress]

Interested in getting a frameset, but that front end is holding me back...

Would a Vision Metron TFA Basebar be compatible on the front end? https://shop.visiontechusa.com/en/aerobars/triathlon-time-trial/metron-tfa-evo-base-bar

I’m not sure. You would need to consider the cable routing and the clearance if the frame.
This video shows how the cables are routed.

[don]

They look like nice bikes and good UCI style set up. My concern for some triathlon riders is that there might be a bit too much set back on the seat. So difficult to get hips over the bottom bracket for modern Pro triathlon style TT position.