silicone/rubber grommets or blind plugs for use in frame

[trailgazer]

I'm looking for silicone plugs to put in the holes of the FD hanger mount. And front- and rear derailleur cable exits. Somebody who knows a place where to buys those?

[Wet Noodle]

Did you try to search the forum for 'plug'? I just did and it seemed to work.

[pushpush]

I wound up buying some Ti set screws to fill my frame holes. They are more flush and weigh less. A tiny drop of threadlock and they will stay put and not fall out somewhere.

[Daviddavieboy]

I'm looking for silicone plugs to put in the holes of the FD hanger mount. And front- and rear derailleur cable exits. Somebody who knows a place where to buys those?

Like the other person I got some ti bolts for the threaded holes and for the di2 holes I just put a color matched piece of tape. Electrical tape comes in a rainbow of colors.

This is who I bought most of my ti bolts from and the tape can be had at a hardware store.

https://vi.aliexpress.com/item/1005006249430555.html?spm=a2g0o.order_list.order_list_main.120.17961802kL8xq6&gatewayAdapt=glo2vnm

[ZacItaly15]

I used some ti bolt in my gravel bike to hide front derailleur bolt fixing holes, but I need to cover the cable routing. I use a zip tie but it's really ugly

[pushpush]

These are what I use for a totally flush result. I bought M5/8mm but could have gone a little shorter. I cleaned with alcohol and painted the top with black nail polish prior to installation.

https://www.aliexpress.us/item/3256805246460906.html

[Daviddavieboy]

These are what I use for a totally flush result. I bought M5/8mm but could have gone a little shorter. I cleaned with alcohol and painted the top with black nail polish prior to installation.

https://www.aliexpress.us/item/3256805246460906.html

These are a super idea ! Even if they get seized it would be easy to drill out.