Lightcarbon: LCR018-D (endurance all-road)

[JimLee]

Has anybody tested it with SRAM XPLR 13-speed 10-46 yet? The last thing I read was that it uses something called 'UDH Mini,' which I had never heard of before.

the mini UDH hanger, It's actually a lightweight version of the UDH hanger. It's smaller and lighter than a regular UDH hanger, but it performs the same function as a regular UDH hanger.
You can install a regular UDH hanger, or remove the UDH hanger and install the T-type.

[bsharp77]

Just a quick update for anyone interested in purchasing - Carol has go back to me to say that I can expect my frameset (54) to be ready around the end of October.
Later than I hoped, but hopefully good things come to those who wait!

[KRoser]

Do you guys have some email how to contact someone at LightCarbon? This frame looks pretty awesome to me and I send them email to info@lightcarbon.com and it has been nearly two weeks with no response.

[KRoser]

sorry, I just now seen a few post up, I will try contact Jim at jim@Lightcarbon.com

[KRoser]

Just a quick update for anyone interested in purchasing - Carol has go back to me to say that I can expect my frameset (54) to be ready around the end of October.
Later than I hoped, but hopefully good things come to those who wait!

Hello, do you have email address to LightCrabon Carol?

[bsharp77]

Hello, do you have email address to LightCrabon Carol?

No problem - you can contact Carol at:
carol@lightcarbon.com

[KRoser]

No problem - you can contact Carol at:
carol@lightcarbon.com

Thanks, appreciate it

[nick82]

just sent a message to the email above, already ordered a new groupset and wheels so might as well go all out and get a new frame as well. i had a couple of questions though what sort of seatpost retention is used i cant see it in any of the photos, also with an electronic groupset how is the battery stored? do you just stuff it in the seatpost?

i have never bought a frame direct what sort of options are available paintwise? somebody mentioned choosing lacquere finish, i really like that white black and gold from when it was on show

[contraptions]

do you just stuff it in the seatpost?

Leftover bar tape is a good way to fit a battery in a seatpost as the tapered profile allows you easily adjust the diameter by overlapping more or less. 

[BeR]

just sent a message to the email above, already ordered a new groupset and wheels so might as well go all out and get a new frame as well. i had a couple of questions though what sort of seatpost retention is used i cant see it in any of the photos, also with an electronic groupset how is the battery stored? do you just stuff it in the seatpost?

i have never bought a frame direct what sort of options are available paintwise? somebody mentioned choosing lacquere finish, i really like that white black and gold from when it was on show

They provide the Di2 battery holder for the seatpost.

[bsharp77]

All frame design options and colours available here:

https://www.lightcarbon.com/decal-painting_n28

https://www.lightcarbon.com/decal-painting_n43

The exact colour scheme from Eurobike is available if you ask for it. It does cost extra though.

[GammaDriver]

All frame design options and colours available here:

https://www.lightcarbon.com/decal-painting_n28

https://www.lightcarbon.com/decal-painting_n43

The exact colour scheme from Eurobike is available if you ask for it. It does cost extra though.

How much does that deep ocean blue / white option add to the cost of a frame?  I like that.

[bsharp77]

I was given a quote of $200 for that specific Eurobike paint job.
A simple chameleon paint job was quoted at only $120.
I ended up choosing raw carbon finish, lacquered with decals.

[GammaDriver]

I was given a quote of $200 for that specific Eurobike paint job.
A simple chameleon paint job was quoted at only $120.
I ended up choosing raw carbon finish, lacquered with decals.

Thank you.

[McMiGHtY]

I had this one on my shortlist, until I saw the triangle thingies on the back, not my cup of tea unfortunately