Velobuild AERO GRAV Frame

Started by Cape_Kirk, May 13, 2025, 01:59:39 AM

Previous topic - Next topic

Ante

Quote from: conradhughes on September 08, 2026, 03:11:15 AMAttached the only pic I took - that's a 28mm tire on the front, it would look a bit better with 35mm+. I think the big gap around the fork is one of the reasons why it's so fast, a lot of 'breathing room' above the turbulent tire. [Caveat: I am stupid]
Bonus pic - the 2.35" G-One Speed in the front. Ran great for a race, but it truly sucked in crosswinds.

Great looking bike! What colour is that?

poeperman


victorjc7

Hi everyone!

I'm considering buying the VeloBuild AERO GRAV frame, but I'm concerned about chainring clearance.

VeloBuild told me that the maximum chainring size is 48T. However, I've seen some posts in this thread mentioning builds with larger chainrings, including a 52/36 setup.

I'd like to know if anyone has successfully built this frame with a **Shimano road 2x drivetrain**, especially:

- Shimano 105 Di2 (R7100)
- Shimano Ultegra Di2 (R8100)
- Shimano Dura-Ace Di2 (R9200)

A few specific questions:

1. Has anyone successfully used a 50/34 crankset?
2. Has anyone managed to fit a 52/36 crankset?
3. Does the issue concern chainring clearance against the chainstay, front derailleur positioning, or both?
4. Does compatibility depend on the crankset model or frame size?
5. Are there any modifications or adjustments needed to make these setups work reliably?

Thanks in advance!

Reddie

Hey,

I ride a size S with an 11-speed mechanical Ultegra groupset.

I'm running a 50/34 crankset with no clearance issues at all. I guess even a larger crankset would be possible.

One thing to keep in mind is that with a 2x setup, the maximum tire width is limited by the clearance between the front derailleur and the tire.

I'm running a 38 mm Schwalbe G-One, which actually measures around 41 mm when mounted. There's still plenty of clearance to the front derailleur, so a wider tire should be possible. My guess is that 45 mm would be the maximum tire width while still maintaining reasonable clearance.

One more thing: Building the bike with a mechanical groupset wasn't the best experience. I actually had to file down a small section of the frame near the front derailleur to get the cable guide through. Routing the brake hoses and shift cables through the headset was also quite a hassle.

Next time, I'd definitely go for wireless shifting.