VB TT-023: Here comes a new build

[rockerplates.de]

Nice work..but please do not use petg cf.....

[boulette]

Nice work..but please do not use petg cf.....

Thank you, what would you use instead and why not PETG CF? Is it PETG the pb or CF or even both?
I designed the mount so that the bracket under the Garmin holder compensates for the flexibility issue of the PETG CF — isn’t that enough?

[raygutt]

If you don't mind, boulette, I will post my (ongoing) build in your thread... and make it the "French VB TT-023" thread 

I received my frameset last friday (about one month after ordering it). I allready had all the components ready. It will be a 1x wireless Rival AXS 12s build (no blip box)

Crankset Magene   PES 515 (powermeter) 165mm
with Pass Quest   SHIMANO X110BCD (4-bolt AERO) Narrow Wide 50t chainring
and Nova Ride   BB T47 85.5 for Shimano    BB

rear derailleur: SRAM   Rival eTap AXS 12s
1 pair of SRAM wireless blips with Leap Components Adapters
1 pair of SRAM wireless blips (for the basebar)
SRAM   XG-1250 cassette
Rival 12s flattop chain (waxed)

Brakes:   SRAM   S900
Pedals: Shimano   Dura-Ace PD-R9100 (second-hand)

Wheels: Yoleo 88m   
Tires: Continental   Grand Prix 5000 All Season 28mm
Tubes: Vittoria   Competition Latex
      
Saddle ISM   PN 1.1 (second hand)



I'll have the fork cut and the brakes installed by a LBS, but I'll have to wait until the end of the week for the mechanic to be available.

Can't wait, so I build a few components to see how it goes...

I asked Chris to add a few handlebar spacers. He gave me 2x20 cm...

[boulette]

Fell free, I'm glad you're enriching this thread.
Nice look so far.

2x20cm for spacers ? Sounds huge. Are you sure ?
I'm using m5x150mm screws and I'm hesitating to reduce because i extended already by more than 4cm.

Or you meant 2x20mm additional spacers maybe ?

[raygutt]

I have a total amount of 2x200m spacers made of 5mm, 10mm, 20mm spacers. I can use as much as I want as long as I find the right screw. (I will order a few threaded rods and cut them to the right length.

by the way, I thought it was M4 screws, are you sure I need M5 screws ?

[boulette]

100% sûre. I asked Chris before ordering them.
Here are the specs of those i have ordered
TCHC M5X150 ACIER 12.9 NOIR PF DIN 912

2x20cm is huge in any case. If i need to elevate it by 5cm more, i'll do differently (thanks to my between the arms plate)

[raygutt]

Back after a three month hiatus...

My LBS had some issues with the front calliper and asked Chris for a new fork. It took some time but finally I got my bike ready to go.

I rode cautiously from the LBS and put it on my hometrainer to fine tune the position and check if everything is OK.

On this picture, I have a total of 35mm spacers (which I guess is the default with the provided screw), I felt OK but maybe a bit too low to get started with a TT position so I added a few spacers for a total of 80mm. FWIW, i could spend 1h15 in the aero position watching Milano/San Remo on the turbo, so I guess it means I'm comfortable with this fit.

Waiting for a not too windy day to try it outdoor. Can't wait.

[alfiomotrambo]

Same frame as the Quick Pro TT 

[klindsey00]

Same frame as the Quick Pro TT 

Not at all, the quick pro TT:ONE is the same as the ican tt017

[NWA-Tri]

I've just ordered the same bike. How was it for your full Ironman? I'm doing IM Copenhagen in August.

Did you Garmin/bottle cage 3D print work? Can you fit two bottles on there?

[raygutt]

Same frame as the Quick Pro TT 

I did this

[wimykema]

Hey there,

It's over in the other VB TT-023 thread. Here you go.

Be mindful: Just yesterday it has surfaced that this toolbox only fits the L frame. I'm now looking for Guinea pigs that have the S and M frame and can send me detailed photos so I can adapt the toolbox for these frames (possible some failed prints involved).

I am starting to build up my VB TT-023 frame and was wondering if you had the .stl files for the toolbox in a size M frame @mattgolt. Hope to hear soon from you. 

[NWA-Tri]

I would also be interested in a medium toolbox too!

I am starting to build up my VB TT-023 frame and was wondering if you had the .stl files for the toolbox in a size M frame @mattgolt. Hope to hear soon from you.