Replacement Dt swiss style rachets

[Bigbobby1482]

I'm looking to replace my rachets in my elite edge wheels, however there are now tons of different rachet styles, and they don't all seem the same?
Some have a hollowed out back, som are solid. Some have a small spring, som have a more stiff spring ect.
Does anyone have a clue on how interchangeable these are?

Eg. would the elite hubs fit thes? https://www.aliexpress.com/item/1005010664172740.html or perhaps these https://www.aliexpress.com/item/1005009002943924.html

Any inside on rachet and springs compatibility on hubs would be nice, it seems really like trial and error if they fit or not.

[pavlo.k]

I used ztto ones that are hollowed out and they fit RD13 hub which is what you probably have in your edge wheelset.
I used same ratchets on my yuanan(elite), xmcs and tagoola wheels which also have cross compatible freehubs. I don't think hollow/solid ratched matters as long as you use the provided springs.

Make sure you are buying ratchet with 2 springs since a newer dt swiss design (ratchet exp) has only one with the other ratchet screwed into the hub shell

[kubackje]

There are a lot of hubs that use one spring. I have one spring in my yuan an hub and it works great, same with goldix 240sl hubs I had on other wheels with classic ratchets. Also new conical ratchets from goldix uses only one spring

[pavlo.k]

There are a lot of hubs that use one spring. I have one spring in my yuan an hub and it works great, same with goldix 240sl hubs I had on other wheels with classic ratchets. Also new conical ratchets from goldix uses only one spring

But these hubs have a rubber o-ring instead of a spring on one side, right? The ratchet ring itself is not fixed

[nelzen]

https://a.aliexpress.com/_mKtkGEV

I have these ones in the 54 teeth configuration for my Elitewheels Edge wheelset. I only used the ratchet itself and reused the springs and stuff that were already in the wheel hub for the original 36t. Never skipped a beat in ~1500km so far but it gets a bit loud for my liking.

[Bigbobby1482]

https://a.aliexpress.com/_mKtkGEV

I have these ones in the 54 teeth configuration for my Elitewheels Edge wheelset. I only used the ratchet itself and reused the springs and stuff that were already in the wheel hub for the original 36t. Never skipped a beat in ~1500km so far but it gets a bit loud for my liking.

Did you buy the titanium version or the steel?

My elite wheels edge hub only has a spring on one side, the other side is held with some red rings.

[nelzen]

I bought the steel version. I do recall only using one spring in its installation. I think I tried both at the beginning and the hub would not close, so I reverted to using the stock accessories.

[dolph]

I'm looking to replace my rachets in my elite edge wheels, however there are now tons of different rachet styles, and they don't all seem the same?
Some have a hollowed out back, som are solid. Some have a small spring, som have a more stiff spring ect.
Does anyone have a clue on how interchangeable these are?

Eg. would the elite hubs fit thes? https://www.aliexpress.com/item/1005010664172740.html or perhaps these https://www.aliexpress.com/item/1005009002943924.html

Any inside on rachet and springs compatibility on hubs would be nice, it seems really like trial and error if they fit or not.

It works properly with the red spacer that comes with elitewheels that use 1 spring, nylon spacer on hub side and metal spacer on freehub side. 36 t ratchet doesnt come with the rubber o-ring, 60t one does. I dont think it makes a difference.

My conical set from goldix came with 2 springs, with a DT non exp spacer and 2 springs noise is not nice and feels a bit grabby. Feels better on elitewheels than other DT style clone hubs.