Mondince FM336

[Chromikson]

Whose frame is this? I accidentally received the movie from Jack. For a moment, he wrote that it was mine, but the colors weren't the same. I had a moment of stress that there had been some communication/arrangement error.Luckily, the matter was quickly resolved😅

[trogger78]

I am 1.76m - 78cm inseam and I got an M.

I am 180cm with 83 inseam. And I suggested to order also in M. But as I saw the mount of spacer in the front I maybe would better take the L frame and only 80mm stem. What are you guys thinking about my concerns?

[Igital96]

I am 180cm with 83 inseam. And I suggested to order also in M. But as I saw the mount of spacer in the front I maybe would better take the L frame and only 80mm stem. What are you guys thinking about my concerns?

That amount of spacers were there because it was the first time I cut the fork. I wanted to make sure I could install all of them if needed. I will cut it again and lower the front end. I think an L for you would be better. The size of this frame is very similar to western brands.

[sirsirsir]

Looking at picking one of these up but it's not entirely clear what the chain set clearance is for a 2x Shimano setup.

Has anyone got experience running a 2x Shimano road or GRX chain set with an FM336

[biceryder]

Received my FM286 today.  Took about 3 weeks to arrive to the UK.  Initial inspection, it looks pretty damn amazing for the price.  Box was intact and frame was padded well.  Paint looks great, kinda wish I did something a little more exciting but still very pleased.  All the brake mounts appear to be properly faced.

If all goes well, I may have it built up and on the road this weekend.

[MF_one]

I am planning to mount a 1x13 from SRAM and an "aero" chainring from Garbaruk or Gemini. Any idea about the wide vs non wide DUB system? How many spacers and how thick?

Thanks!

[Zrader]

Received my FM286 today.  Took about 3 weeks to arrive to the UK.  Initial inspection, it looks pretty damn amazing for the price.  Box was intact and frame was padded well.  Paint looks great, kinda wish I did something a little more exciting but still very pleased.  All the brake mounts appear to be properly faced.

If all goes well, I may have it built up and on the road this weekend.

Post some pics! I’m not sure that I’ve seen an FM286 on here.

[Chromikson]

That amount of spacers were there because it was the first time I cut the fork. I wanted to make sure I could install all of them if needed. I will cut it again and lower the front end. I think an L for you would be better. The size of this frame is very similar to western brands.

Take a look at the trek website and their recommendations for checkmate slr. Both frames have identical geometry.

[Igital96]

I am planning to mount a 1x13 from SRAM and an "aero" chainring from Garbaruk or Gemini. Any idea about the wide vs non wide DUB system? How many spacers and how thick?

Thanks!

I am running dub wide. 2.5mm spacer outer left side - 5.5mm spacer outer right side (drive side). I got dub wide because there were barely stock of sram rival xplr or force xplr.

[Chromikson]

I am planning to mount a 1x13 from SRAM and an "aero" chainring from Garbaruk or Gemini. Any idea about the wide vs non wide DUB system? How many spacers and how thick?

Thanks!

I ordered a ztto bottom bracket and there are two spacers, one for MTB and the other for road

[Kamool]

I ordered a ztto bottom bracket and there are two spacers, one for MTB and the other for road

I fitted that bottom bracket with SRAM DUB (non-wide) Force AXS set and ROAD spacer on the right side. It resulted in crank arms having a 5mm difference between arm and seattube/bottom tube. I fitted MTB spacer on the right side (nothing on the left and no ROAD spacer as well) and it's almost centered.

[MF_one]

Put some protection in the rear chainstays and sent it for a bit. Liking the ride so far.

I am planning to buy the same handlebar from Lexon. Is it the LEXON UNOX gravel model? Did you have to buy specific spacers for this frame?

[MF_one]

Just for your info, Jack has offered me to pay through SEPA instead of SWIFT. I can save some dollars there (around 40$). Any experience with that?

My plan is to mount thefollowing for the groupset:

SRAM bottom bracket DUB T47, 85.5mm (Herstellenummer: 00.6418.033.000)
SRAM Force XPLR AXS E1 13-fach Schaltwerk 10-46T RD-FRC-1E-D2 (Herstellenummer: 00.7518.193.000)
Sram Force Kurbelarm E1 DUB 165mm (Herstellenummer: 00.6118.746.001)
SRAM XG‑1371 Cassette 13-speed 10-46 (Herstellenummer: 00.2418.160.000)

Do you guys see any objection not to mount the 1x13 from SRAM? I am not sure actually if i will have to rder the WIDE version of the same BB or not

[CycOps]

Just for your info, Jack has offered me to pay through SEPA instead of SWIFT. I can save some dollars there (around 40$). Any experience with that?

I payed for my frame to a German bank account Mondince has, no problem with that. A few days after I made the money order Jack informed me about the limited tire clearance and offered a few solutions, one was he refunds me the purchase price. So far, IMHO, Mondince seems to be a very trustworthy company. Frame is on it's way.
GRX DI2 2x12 group set is on the shelf waiting. Need to order spokes to laceyy 49mm rims IW 32mm from TimeTec ;-)

[Zrader]

I payed for my frame to a German bank account Mondince has, no problem with that. A few days after I made the money order Jack informed me about the limited tire clearance and offered a few solutions, one was he refunds me the purchase price. So far, IMHO, Mondince seems to be a very trustworthy company. Frame is on it's way.
GRX DI2 2x12 group set is on the shelf waiting. Need to order spokes to laceyy 49mm rims IW 32mm from TimeTec ;-)

Yeah I would agree that they are pretty trustworthy. I mean they have the trust of Cube, State, and Argon 18. It’s not like they are some random no name Chinese manufacturer.