Mondince FM336

[poyo]

yes, you need adapters for 160mm rotors. I have ordered the ones from Galfer:
Galfer SB006 Flatmount Disc Adapter Front
Galfer SB007 Flatmount Disc Adapter rear

You don't need an adapter for the rear

[MF_one]

You don't need an adapter for the rear

That is new to me, I thought both come for 140 ready, if bigger, an adapter is needed. It is also reflected in their specs like this

[lotbs]

https://www.reddit.com/r/ChineseCarbon/comments/1sv72q3/comment/ojtgubl/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

[poyo]

That is new to me, I thought both come for 140 ready, if bigger, an adapter is needed. It is also reflected in their specs like this

This frame natively supports a 160 mm rear disc without an adapter.

[MF_one]

Frame arrived and I am positively surprised about the quality overall.
Here attached the weights of each component as they come.

[Zrader]

Nice! I just got my mom’s in today. Build starts tonight.

[MF_one]

I also attached the measurement of inner fork width and rear clearance in frame.

Not super accurate measurements, but I hope it helps

[choan]

I also attached the measurement of inner fork width and rear clearance in frame.

Not super accurate measurements, but I hope it helps

Hello mf, thanks for your measurement.
Did you order the fork without rivets ? the order went fine ?

[MF_one]

Hello mf, thanks for your measurement.
Did you order the fork without rivets ? the order went fine ?

Fork without rivets. Order took longer due to issues with brake cable hole and wrong size coming out from paintshop

[MF_one]

I am still struggling on what to mount as wheels.

Since I need something cheap and I already tried out elitewheels, I would like to go for some other brands to test.
Budget is up to 600 USD, any recommendation?
If I cannot find something in the next few days, I will grab the wheels that I have from my MTB from Speedsafe (34mm extern, 28mm internal, 28mm deep) 1390gr.

[Lotnik]

I am still struggling on what to mount as wheels.

Since I need something cheap and I already tried out elitewheels, I would like to go for some other brands to test.
Budget is up to 600 USD, any recommendation?
If I cannot find something in the next few days, I will grab the wheels that I have from my MTB from Speedsafe (34mm extern, 28mm internal, 28mm deep) 1390gr.

Maybe this one?
https://serenadebikes.net/more-wide-30mm-inner-carbon-gravel-bike-wheelset-with-the-stronger-SR038-hubs-p6736090.html

[MF_one]

Maybe this one?
https://serenadebikes.net/more-wide-30mm-inner-carbon-gravel-bike-wheelset-with-the-stronger-SR038-hubs-p6736090.html

Do you have them? If so, how long did it take to arrive? or maybe someone else can give more insights about shipping time

[Lotnik]

I recently ordered the MTB set from them. But that was this week. They should send it next week. For my build I went more budget with CSC 29 mm inner 35 mm outer width. It came in 3 weeks after the order.

https://a.aliexpress.com/_EwMD9MS

I swap ratchet for ztto titanium one as there was some recent reports with broken ratchet teeth in CSC.

[Igital96]

Do you have them? If so, how long did it take to arrive? or maybe someone else can give more insights about shipping time

I have them. I am the owner of the purple FM336 that you can find in previous pages of this thread and in reddit. I have done 600km with those wheels (G-One RS + Vittoria Airliners) They are indestructible so far. I have had a fall where I ate a tree that was laying on the ground and I didn't see, and the wheel ate like nothing. Spokes kept the tension and the rim has no damage. I have eaten potholes because I didn't see them while chatting with my ride-pal and nothing. They weight 1390+- GR, 30mm IW, 36mm EW, 50 mm deep.

It took one week and a half for delivery (Germany). Production time, I don't know. Maybe the setup you want is already in stock. You must contact them through WhatsApp to know further information.

[MF_one]

I have them. I am the owner of the purple FM336 that you can find in previous pages of this thread and in reddit. I have done 600km with those wheels (G-One RS + Vittoria Airliners) They are indestructible so far. I have had a fall where I ate a tree that was laying on the ground and I didn't see, and the wheel ate like nothing. Spokes kept the tension and the rim has no damage. I have eaten potholes because I didn't see them while chatting with my ride-pal and nothing. They weight 1390+- GR, 30mm IW, 36mm EW, 50 mm deep.

It took one week and a half for delivery (Germany). Production time, I don't know. Maybe the setup you want is already in stock. You must contact them through WhatsApp to know further information.

Wow, thanks for the feedback, did not know the brand very well. I am in contact already tryign to get a discount. It seems pretty good deal actually.