Quick Pro TR:One aero extensions

[Buffon_bj]

Does anybody know who makes the TR:One aero extensions and if they are available on Ali? The dimensions and specs look excellent and, unlike Winow offerings, their length is customizable. Quick Pro USA replied to me that they can't be sold separately, while Panda Podium has yet to confirm directly from Quick.

Alternatively, if anyone knows of similar extension systems, please share!

[Buffon_bj]

Thanks for the tip @pandaGravel15. I did not know of these Kairos extensions, but I've had good experiences with Tideace in the past. However, I think that the Kairos is probably not good for my needs as I don't think it's UCI legal in the larger sizes. The Vision Metron TFE Evo, which the Kairos is largely a copy of, has an angle of 15 degrees for the main extension and then 50 degrees for the ski part. The Kairos is a whopping 25 degrees plus 53 degrees for the ski! Based on my calculations, the height of the extension tips would probably be well past the UCI legal 14cm from the middle of the elbow rests.

[empathetic togue]

Thanks for the tip @pandaGravel15. I did not know of these Kairos extensions, but I've had good experiences with Tideace in the past. However, I think that the Kairos is probably not good for my needs as I don't think it's UCI legal in the larger sizes. The Vision Metron TFE Evo, which the Kairos is largely a copy of, has an angle of 15 degrees for the main extension and then 50 degrees for the ski part. The Kairos is a whopping 25 degrees plus 53 degrees for the ski! Based on my calculations, the height of the extension tips would probably be well past the UCI legal 14cm from the middle of the elbow rests.

i am jealous that you are in uci height category 3 and have got 14cm to play with for the aero extension rise. I was in the market for some aero extensions for my TT:ONE i had a look at the TRONE cockpit and the rise looks to be greater than the 12cm i am allowed in my UCI height category (even with 0 degree angle washers). And for that matter, most of the wattshop/fast TT copies on Ali look to cater for the triathlon crowd, since most look to be greater than 14cm rise. In any case I don't want to spend $600+ so also looked at aliexpress for cheaper options. I ended up ordering these last week in size small to (hopefully) sit within the 830mm limit from centre of BB to tip of extensions:
https://www.aliexpress.com/item/1005011547602630.html?spm=a2g0o.order_list.order_list_main.25.5c611802Dn8qvY

and the rise doesn't look to be too great, so (again hopefully) i can adjust so for around a 12cm rise from armrest to tip.

Also ordered this adaptor plate, the seller told me it should fit the monoriser on my TT:ONE, if not will drill out correct hole spacing.

https://www.aliexpress.com/item/1005012017044344.html?spm=a2g0o.order_list.order_list_main.30.5c611802Dn8qvY

[teichs42]

Does anybody know who makes the TR:One aero extensions and if they are available on Ali? The dimensions and specs look excellent and, unlike Winow offerings, their length is customizable. Quick Pro USA replied to me that they can't be sold separately, while Panda Podium has yet to confirm directly from Quick.

Alternatively, if anyone knows of similar extension systems, please share!

They are available to buy.

https://www.quickprousa.com/products/tri-aero-bar

[Buffon_bj]

i am jealous that you are in uci height category 3 and have got 14cm to play with for the aero extension rise. I was in the market for some aero extensions for my TT:ONE i had a look at the TRONE cockpit and the rise looks to be greater than the 12cm i am allowed in my UCI height category (even with 0 degree angle washers). And for that matter, most of the wattshop/fast TT copies on Ali look to cater for the triathlon crowd, since most look to be greater than 14cm rise. In any case I don't want to spend $600+ so also looked at aliexpress for cheaper options. I ended up ordering these last week in size small to (hopefully) sit within the 830mm limit from centre of BB to tip of extensions:
https://www.aliexpress.com/item/1005011547602630.html?spm=a2g0o.order_list.order_list_main.25.5c611802Dn8qvY

and the rise doesn't look to be too great, so (again hopefully) i can adjust so for around a 12cm rise from armrest to tip.

Also ordered this adaptor plate, the seller told me it should fit the monoriser on my TT:ONE, if not will drill out correct hole spacing.

https://www.aliexpress.com/item/1005012017044344.html?spm=a2g0o.order_list.order_list_main.30.5c611802Dn8qvY

Haha yes, one good thing with being over 190cm tall in cycling! Otherwise my height just makes me rather like a sail in the wind...

Please tell me how this went with the Winow extensions! I've looked at them as well. And the adaptor plate is a good shout, been looking for something like that.

They are available to buy.

https://www.quickprousa.com/products/tri-aero-bar

Wow, thanks! Amazing how when I inquired on 21th May, I got the response "Sorry, we do not sell this item separately.". I will be in contact with them as well.

[teichs42]

Wow, thanks! Amazing how when I inquired on 21th May, I got the response "Sorry, we do not sell this item separately.". I will be in contact with them as well.

Someone posted them here a few weeks ago in a different thread.

[btsaubt]

anyone with experience mounting bottles between the arms on their base bar/mounting plate? curious to see if it would support ~1.5L of hydration which would be a little over 1.5kg depending on carb density in bottles