Integrated handlebar with raise?

[Mint Julep]

This isn't raised; it just has a Y-shape, but if you look closely at the technical drawing and the profile, you can see that it isn't raised.

If you look closer you'll see 20mm lift.

[Specialf.]

If you look closer you'll see 20mm lift.

That’s what they say, but pay attention to the downward angle of the stem.
The stem is angled sharply downwards, effectively cancelling out the rise of the handlebar.
Compared to other riser bars, this one seems the least effective to me.

[pecampbe]

New from Twitter

https://twitterbikeusa.com/products/twitter-riser-integrated-carbon-handlebar-stem-high-modulus-t1000-t1100-carbon-400-90mm-full-internal-routing

Wild that anyone would pay that much for a twitter handlebar.

[Mint Julep]

That’s what they say, but pay attention to the downward angle of the stem.
The stem is angled sharply downwards, effectively cancelling out the rise of the handlebar.
Compared to other riser bars, this one seems the least effective to me.

Ah, yeah.  You're right.

[Ultramic]

That’s what they say, but pay attention to the downward angle of the stem.
The stem is angled sharply downwards, effectively cancelling out the rise of the handlebar.
Compared to other riser bars, this one seems the least effective to me.

That's assuming you are running -6° or -8° stem. I'm currently running a -10° stem so the effective rise for me will be the full 20mm. There are other risers bars about to hit the market with a -6° and -8° stem which would give me an overall rise for 25-30mm which is probably too much for me.

[Kar25]

https://rozybike.com/xgt-one/#

[vtlyz]

https://rozybike.com/xgt-one/#

Looks pretty similar to the Ullicyc T5 that someone else linked in concepts except that one is 40mm rise. At least the angles are a little sharper instead of being an obvious Y1RS gullwing bar clone.

[qwertyas]

I know nothing about this brand, lacks in the aesthetics department, but it's integrated with 30mm of rise: https://www.aliexpress.us/item/3256812977664786.html?

That's an interesting proposal - aesthetics aside, it's a bit too gravelish for me (10 cm flare). But worth considering, thanks!
The reach is longer, but I could go with the 80mm stem.