See likes

See likes given/taken


Posts you liked

Pages: [1]
Post info No. of Likes
Re: Race frame with UDH hanger
Quote from: bremerradkurier on September 20, 2024, 10:05:32 AM
At the international courier meet ups, everyone wanted to trade for De Gronne Bode (spelling/grammar?) Copenhagen  neon green Tuborg jerseys.

ETA checked out Principia's website-their carbon frames seem to be a decade or so behind current trends.

Close! “De grønne bude”. I forgot about those  :o

Seems right. I have not seen a person under 50 on a Principia. The only danish bike brand you see a bit on the road here, is Pronghorn and that is just a Winspace frame.
September 20, 2024, 02:20:30 PM 		1
Re: Speeder Cycling SC-R55D My build is ready.
Built with ltwoo er9 groupset and wheels from Peter
Weight with pedals and bottle cages is 7.7kg which is not the lightest but considering the size and a very deep rims it's not too bad. I originally installed riro carbon cranks but the chainrings  turned out to be warped so I'm waiting for a replacement to arrive. With riro cranks the weight is getting close to 7.5kg
December 01, 2024, 03:18:03 PM 		1
Re: XM Carbonspeed Ultra-Wide Gravel Wheelset with Titanium Spokes
Quote from: Rolle2k on August 04, 2025, 05:38:59 PM
Depends on configuration. But they were 670USD with CX-RAY spokes, and i was quoted 770USD with titanium spokes. Choosed CX-ray to have something widely available rather than something harder to find.
Shipping depends on country but in my case $115.
To be clear, I told you that you guys are the earliest guys who order these wheels, so there were discount for those orders.

T1100 version D53TU-41 wheelset UD paintless built with new R248 lighter hubs 24/24H 36T rachets TPI steel bearings with Shimano HG driver, Sapim CX-Ray spokes, Sapim self-securing aluminum nipples weighs around 1375g/pair, and they are 800 USD/pair excluding shipping,

Same combo built with titanium spokes would weigh around 1330g/pair and they would be 900 USD/pair excluding shipping

T800 version wheelset UD paintless finish with old R280 hubs with Sapim CX-Ray spokes, Sapim self-securing nipples would be 715 USD/pair and weighs around 1445g/pair

Sapim brass nipples would increase the wieght around 35g/ set
August 05, 2025, 05:55:39 AM 		1
Re: Velobuild VB-R-368 Aeroframe Feels like Im spamming this thread, but just saw that they updated the website with new pictures of the real frame!

The headtube from the front looks nice  :D

https://www.velobuild.com/products/2026-vb-r-368-carbon-fiber-aero-road-bike-frame-disc-brake
August 06, 2025, 04:06:55 AM 		1
Re: Velobuild VB-R-368 Aeroframe I really like it. Only this seat post head is a no-go.
Any chance of finding another suitable seatpost that has less gap between the saddle and the seat post?
It looks as if the saddle is just sitting on top and doesn't belong to the bike.
October 11, 2025, 04:20:35 PM 		1
Re: New TanTan Aero Frame TT-X65 This is on my short list - I'm tackling a 24hr race next year on a pretty flat, tarmaced, race car circuit - just lap after lap for 24hrs 🤦🏼‍♂️😂 - and I'm looking for something more appropriate than my current gravel bike 😂.
Anyway, I can't even find any pictures of this frame with wheels on it 😂 never mind an actual review. Info on this and the X67 is pretty scant. I had decided on the X34 but apparently its discontinued now. I've asked if the X68 is still an option. Waiting to hear back.
so if anyone has any pics - it would be appreciated.
November 03, 2025, 11:30:54 AM 		1
Re: New TanTan Aero Frame TT-X65
Quote from: tgarne on February 15, 2026, 12:23:13 PM
Finally started building up the bike this weekend.

Everything is going smooth so far.

Total weight without DOT fluid and bar tape is 7,48

Sir I need to warn you
That you have there a sexy weapon !!!
February 16, 2026, 03:00:14 AM 		1