Hi, I'd like to replace the standard screws with titanium screws. Does anyone have any sets they'd recommend?

Hi, here's my Model S assembled.

I'm waiting for the EliteWheels Ent 2.0 wheels; in the meantime, I've installed the old ones.

Do you think the headset is assembled correctly? I checked by braking the bike and pushing forward, and there's no movement.

There might be a little, but it's hard to tell if it's movement or another component making the noise (like the brakes).

Thanks!

Quote from: Lotnik on August 19, 2025, 02:19:37 AM
With a sandpaper. But first contact with the seller about the issue.

What sandpaper do you recommend using? 1000 grit?

The seller confirmed to me that it was a paint problem.

I was thinking of using it for a few days and monitoring the mark to see if it grows, would that make sense?

How can I remove paint?

How do I know?

Hi, I received the frame today. During inspection, I noticed this single flaw. Do you think it could be a serious structural issue, or is it just cracked paint around the thru-axle attachment?

Thanks!

Hi, I should start assembling the frame tomorrow.
I've read the whole thread, but I haven't quite figured out how to stack the bearings between the fork and the frame. Does anyone have any photos of the correct order? (Even the up/down orientation.)


Are the following tightening torques okay?

Headset preload bolt (top cap) 2–3 Nm
Expander plug (compression plug) 7–8 Nm
Stem steerer clamp bolts (side bolts) 5–5.5 Nm
Stem faceplate bolts (handlebar clamp) ~4 Nm
Seatpost clamp ~6 Nm
Brake levers & shifters (on carbon handlebar) 5–6 Nm
Lock-on grip collar bolts 1–2 Nm
Rear brake caliper (on carbon frame) 6 Nm

Thanks!

the price has increased but with coupons it still goes down

Mine will be shipped tomorrow. The seller sent me photos (it's the BOB color with the carbon covered in gloss black).

He confirmed that I'll also be getting the new handlebar and that the decoration on the left is not removable.

Hi, for those who have already assembled the frame, what advice would you give to a newbie?

Thanks!

Hi, I've just started cycling and am getting into building my own bike.

I have two questions:

1. Can you confirm that it's possible to mount 32mm wheels? (I saw someone did it; are there any updates?)

2. What's a fair price for the frame? Will it drop significantly during the November 11 sales?
(https://it.aliexpress.com/item/1005005213767330.html)

Thanks, bye!!