Asking $120 + shipping from California. Payment via Paypal G&S only.

Selling a Spcycle HB-068 Full Carbon Integrated Handlebar. This is an aero-style bar designed for gravel or road use. Comparable to Trifox/Winspace integrated bars.

Fitment Note: While the technical stem length is 110mm, due to the backsweep of the tops, the effective stem length feels closer to 95mm. Please take this into account for your bike fit.

Cable Routing Options: These bars are versatile. Cables run internally through the bar and can either:
Exit before the stem: For standard setups where cables route around the headset.
Run fully internal: Through the stem/headset for modern fully integrated frames.

Specs:
Width: 420mm (Center-to-Center)
Reach: 69mm
Drop: 116mm
Stem: 110mm (Nominal) / ~95mm (Effective)
Stem Angle: 6 Degree
Material: Full Carbon Fiber (Matte Finish)
Fork Size: 28.6mm (1 1/8")
Weight: 428g w/ computer mount

What’s Included:
Carbon Garmin Computer Mount: (As pictured).
Headset Adapters: Top covers/transition spacers for both Standard IS42 (1-1/8") and Oversized IS52 (1.5") upper bearings.
Full Spacer Kit: 2x 20mm, 4x 10mm, 2x 5mm (Split/interlocking style).
Compression Rings: Two sizes included (7.0 and 7.5).

Pick up in Corte Madera or can ship at buyer's expense.

Tags: carbon handlebars, integrated cockpit, gravel bike, road bike, aero bars, 420mm, 110mm stem, internal routing, IS42, IS52.

Balugoe has some new components! As usual, I've been happy with a lot of their components. They're up there with the likes of Elita One when it comes to carbon bars, stems, etc.

Carbon stem with full integrated spacers:
https://www.aliexpress.us/item/3256809272114703.html

$70 for a stem with "lenght" printed on it :/

Looking for a carbon handlebar with a similar profile as the Zipp XPLR 70 with just a small amount of flare/out sweep that makes the drops about 50mm wider than the hoods. Most gravel bars I find on AliExpress have a lot of flarem

Did you ever find a solution here? I have a Spcycle G058 frame that came with a handlebar that I want to replace and because the frame doesn't have hose/cable ports I need to run them through the headset. I'd like to use a non integrated stem/handlebar and thus looking for a headset cover with 2 brake hose ports. The upper headset bearings are 52mm OD x 40mm ID, 45x45 deg, 7mm height

I bought a frameset with these dropbars with the expectation/understanding the bars had a 69mm reach. After mounting and noticing they felt very short, I found out from Spcycle that the "69mm reach" is defined/measured from the end of the bar, not from the center of the stem clamp area. Due to 5 deg backsweep, the bar goes backwards ~15mm before going forward 69mm resulting in an actual/effective reach of ~54mm which is really short.

I think the product was mislabeled/advertised and I'm owed a free exchange or refund. What do you guys think?

Listing for reference:
https://www.aliexpress.us/item/3256808837292722.html

Appreciate your feedback.

Can folks recommend jerseys that have very minimal branding/logos and don't have any silly text like "keep cycling keep moving". I just want something minimal. Thanks!

Here are some photos of my G058's integrated bars (from SPCycle, note the backsweep on the tops). They're 420mm wide with a 110mm stem. Frame is chameleon blue glossy.

Hello

For rims that are not in stock, production usually takes 10-15 working days, and after shipping, it takes 8 days to transport by FedEx. Taxes include.

That's very helpful thanks.