Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - stino77

Pages: [1] 2
1
Road Bike Frames, Wheels & Components / Re: ICAN TT017 TT Bike Build
« on: September 15, 2026, 09:52:19 AM »
Quote from: empathetic togue on August 16, 2026, 08:41:03 PM
i can't speak to your first question, but for question 2, the winow arb02 is a direct fit onto the supplied adaptor plate. Its not entirely clean or pretty (the circular carbon extension mounts poke out a bit, unless you want to cut them off). i purchased this adaptor plate and drilled out the hole spacing so it would match the mono riser bolt spacing for a slightly cleaner look:
https://www.aliexpress.com/item/1005012017044344.html?af=3972578&cn=50110&cv=1&dp=bI3pFuC5e6s-cn_sju1Suks9QBywDKOUBQ&LSNSUBSITE=Omitted_bI3pFuC5e6s&aff_fcid=dcdf7ab686604df8a087efdec69b7444-1786930742054-00504-_DmYcslv&tt=CPS_NORMAL&aff_fsk=_DmYcslv&aff_platform=portals-tool&sk=_DmYcslv&aff_trace_key=dcdf7ab686604df8a087efdec69b7444-1786930742054-00504-_DmYcslv&terminal_id=f1fb0f4162a9488da2165660660df383&afSmartRedirect=y
Do you maybe have a photo of this setup? I have also the original plate but look for another option

2
Road Bike Frames, Wheels & Components / Re: ICAN TT017 TT Bike Build
« on: September 15, 2026, 09:48:29 AM »
Quote from: hebron on August 23, 2026, 05:05:57 AM
What is the bolt spacing on the Ican monoriser?
I am about to order one, but looking for options to change the frontend of the bikes directly.
What option did you choose for'change?

3
Road Bike Frames, Wheels & Components / Re: ICAN TT017 TT Bike Build
« on: April 10, 2026, 04:51:15 AM »
Quote from: Triexpress on March 26, 2026, 09:15:02 PM
Keep us updated on the build.

Did you contact Quikpro direct? I wonder if Pandapodium would be able to help with the bars.

Im looking at making a custom plate from a local machinist so that I can have more adjustment and extend the bars out further. Once I have done this I will share the info.

Cool stuff! Nice cockpit, maybe an option for me also.

You did not use the original base plate. I did. And mounted the Winow Extensions. I notice some little flex on the plate. Is this normal? I never ride on a monoriser cockpit so maybe this is lilttle more flexible than a dual riser cockpit?



4
Road Bike Frames, Wheels & Components / Re: Advice on a ICAN 017 or Winow/BXT TT 119
« on: January 27, 2026, 02:03:56 AM »
I have used the BXT TT 119 in 2025 in a few triathlons. Nothing bad to say about this frame, worked out pretty good! I know have the Ican, because I liked it more visually ;-). Still not ride it outside so can not compare the feeling and handling of this bike. I keep you informed...

5
Road Bike Frames, Wheels & Components / Re: ICAN TT017 TT Bike Build
« on: December 11, 2025, 06:26:47 AM »
Quote from: Triexpress on December 10, 2025, 03:16:30 PM
Nice!
Do you have some close up’s of the mods you made for the aero bars?

For the moment no mods made. This weekend more finishing work. I think I just gonna cut the original base plate because normally going to use the winow extensions always.
But first fit the extensions, spacers with correct bike fit measures before doing any modifications...

6
Road Bike Frames, Wheels & Components / Re: ICAN TT017 TT Bike Build
« on: December 03, 2025, 06:17:29 AM »
Some quick pictures of the build, still in progress but we are getting there ;-). Still need to adjust the fit measurements and install the SRAM Blip mounts on the extensions. Ah, and don't forget my chain ;-)

7
Road Bike Frames, Wheels & Components / Re: ICAN TT017 TT Bike Build
« on: November 28, 2025, 03:20:55 AM »
Quote from: Triexpress on November 27, 2025, 03:08:54 PM
Post some pictures of the build.
Did you get the new version of Winow bars?

I will!! Hopefully this weekend completed.
No, just the 'older' version. New ones are more expensive. So had to stay within a budget. ;-). And the Winow bars had good comments so...

8
Road Bike Frames, Wheels & Components / Re: ICAN TT017 TT Bike Build
« on: November 27, 2025, 08:16:12 AM »
Quote from: Triexpress on November 26, 2025, 11:55:13 PM
Some pictures of the bike in action at Ironman 70.3 WC Marbella.

During the race I passed the same bike but the Quick Pro TT:ONE. I cant work out what the connection is with the ICAN TT017 and Quick Pro TT:ONE is. Copy? Shared design?
I didn't see any other ICAN's, most were your usual TT bikes

Cool!

update here: Winow Extensions arrived and finally got my rotor BB also available. So this weekend, continue the build process...

9
Road Bike Frames, Wheels & Components / Re: ICAN TT017 TT Bike Build
« on: November 14, 2025, 02:23:16 AM »
Quote from: OlHag Cyclismo on November 13, 2025, 08:43:18 PM
Frame and the monoriser look incredible. Really having a tough time deciding between this and the Velobuild TT frame. My main concerns are the slack seatube angle, which changes with saddle position, and being able to adjust the angle on the front end. What are you planning on doing to get the right angle for the tt bars?

Standard it has 10° angle with the monoriser and with a 15° angled riser from winow for my extensions I will have 25° of angle...

10
Road Bike Frames, Wheels & Components / Re: ICAN TT017 TT Bike Build
« on: November 12, 2025, 10:38:07 AM »
I guess on using the original plate but remove the parts with a saw that are no longer used anymore. Not reall sure yet, maybe also look at the method that was used here in this topic before. Keep you informed on the process...

11
Road Bike Frames, Wheels & Components / Re: ICAN TT017 TT Bike Build
« on: November 12, 2025, 08:59:43 AM »
Starting the build...still waiting for my Rotor BB...;-). Winow Extensions also ordered but that can take more time to arrive so will use my current extensions.

12
Road Bike Frames, Wheels & Components / Re: ICAN TT017 TT Bike Build
« on: November 05, 2025, 07:26:00 AM »
Quote from: IslandRider on November 05, 2025, 01:18:34 AM

How many days did they quote you for delivery?

Not really mentioned. I have the DPD shipping details received from them and yesterday it should be arrived in Europe. No waiting for the details of the DPD tracking.
I must say they are very responsive and helpfull via email. If everything arrives smoothly. 100% satisfied about customer service! Now...waiting...


13
Road Bike Frames, Wheels & Components / Re: ICAN TT017 TT Bike Build
« on: October 27, 2025, 03:09:19 AM »
Painting is done. Shipment is on its way. Fast processing and clear and fast communication. Untill now, no single remarks...

14
Road Bike Frames, Wheels & Components / Re: ICAN TT017 TT Bike Build
« on: October 20, 2025, 02:22:49 AM »
Quote from: teichs42 on October 17, 2025, 12:13:40 PM
Where are you shipping to? I just got a quote from them for $229 to US and they said 'included customs tax". Hoping that really would cover everything and I wouldn't be hit with more once it gets here.

Europe. 150USD included tax. This is normal for China transfer towards Europe. In the past no issues or extra costs involved.

15
Road Bike Frames, Wheels & Components / Re: ICAN TT017 TT Bike Build
« on: October 16, 2025, 03:35:16 AM »
For the Ican owners? How do you compare the sizing of the frame with the TT119/VB023 frameset? I have 51cm TT119. Will the Ican be a S compared to that?

edit: order placed. Convert my TT119 setup towards this one. Keep you posted here...

Pages: [1] 2