Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Hillboy

#1
Quote from: waltthizzney on <strong>Today</strong> at 12:11:23 PMCan anyone explain how to install the stock headset?

Does the small black washer base go under or over the lower head tube bearing?

Am I suppose to jam it down? I don't want to damage the carbon

I don't have the stock headset as opted for the FSA ACR low stack but on my build there is nothing else other than the bearing on the lowers side. The bearing just sits on the fork.
#2
Quote from: pieter bevernage on November 19, 2026, 10:27:33 AMDisappointed with the Long Teng Sports LTK266-D-SL – Serious Quality Concerns

I am extremely disappointed with the quality of my Long Teng Sports LTK266-D-SL carbon frame.

During inspection prior to assembly, I discovered several concerning defects:

A cavity approximately 2–3 mm deep inside the bottom bracket area.

Poor and irregular carbon finishing inside the seat tube.

Excessive play between the headset bearings and their bearing seats.

I am surprised that this frame passed the manufacturer's quality control.

I no longer have sufficient confidence in the safety of this frame to ride it.

Has anyone else experienced similar quality issues with Long Teng Sports frames?

I have also recently received this frame and it appears fine, but I'm still building.

I'm curious within the seatpost area are they actually voids with no resin? Or are they smooth?

The bottom bracket area, is that at the very bottom centre of the shell? If so, this area is where the bladders are inflated/removed to my understanding and later a small circular plug is inserted to fill this, along with resin. Mine has an obvious circular section about 15mm diameter but no resin overflow, this appears more raw carbon/matte colour. Is yours perhaps the same with just messy resin? Or is there a physical void that you can feel?

I'm happy to post some images if you let me know before tomorrow when I finish my build.
#3
Quote from: tastycrousti on September 22, 2026, 12:17:26 PM
Hey everyone,

Wanted to share my build and give some feedback since I found so much useful info on this forum when researching this frame. A huge thanks to everyone who shares their builds and experiences here, it really helped me make my decisions.

Listing:

Frame: LongTeng LTK266 D SL (size XL)
Groupset: Sram Force D2 46/33 10/33 (climbing gears, obviously)
Crankset: Quarq PM (172.5mm)
Wheels: Zipp 303s
Tires: GP 5000 S TR 32 (set up with TPU)
Handlebar: Tavelo Avro Gen 1 (40x120)
Saddle: Ryet carbon
Pedals: Look Keo 2 Max (not in the photo)
Headset: FSA 55R (goes without saying at this point, but might as well mention it)
Bolts: Titanium & aluminum, Carbon-Ti
Rotors: Sram 160mm (I had enough with my rim brakes road bikes, I'm just here to stop at the bottom of the descents)

Final weight: 7.6kg with bottle cage, computer mount, and pedals.

Ordering / shipping:
Communication with the company was easy, quick and clear replies. Shipping took about 1 month. No import taxes on arrival in France.

Assembly:
Zero assembly issues. One thing to watch out for: the stock seatclamp screw is too long, swap it for a shorter one before you assemble the bike. Also need to swap the seat rail clamp bolt for a titanium one, the stock one is already rusting.

Bike feel:
Confident, but like others have said, it's honestly kind of boring (in a good way). It's good at everything, snappy enough when you are out of the saddle, just a genuinely nice bike to ride. Nothing to complain about. Feels confident downhill, helpful when you are exhausted, and keep the speed nicely. It's probably not the funniest bike to ride, but it's extremely reliable and that's what I'm looking for and light race / endurance frameset. Already 1029km on the bike since I finished the build the 7 august.

Can't wait to try the GP5000 S TR in 35mm!

Thanks again to everyone here, this forum's been a huge help!

Nice, is the raw with UD glossy finish?