Quote from: Nicoloc on September 11, 2024, 02:18:32 PM
I t looks like mine died today after a little less than 2 years.
I'm in contact with customer support as it still in warranty period....
We will see how mMagene react ....

After long email discussions and multiple photos and measurements, magene accepted to get warranty activated.
Sending the device back to china wasn't a that easy but made it after 3:weeks.
And finally after a month at Magene they told me that powermeter was repaired....
I'm now waiting to receive it and test it.
I'll keep you posted
Nicoloc

Hi community
Winter is coming... but before that Autumn is there

Any recommendation regarding a rain jacket for heavy rain road cycling ?
Thanks 

I t looks like mine died today after a little less than 2 years.
I'm in contact with customer support as it still in warranty period....
We will see how mMagene react ....

Hi all
If i refer to Yuananbike.com which is teh manufacturer for elitewheels, it look likes that the rim itself can be either used as rimbrake or Disc brake 
https://www.yuananbike.com/product/carbon-fiber-cycle-rims-38mm-depth-road-rims.

This put aside, from your posts i understand that :
- nipple angles might be different due to hub width
- hub might be difficult to find for front wheel (20 spokes)

to answer some of the questions :
Why not selling :  rim brake track can be used (not new)  and Chinese wheel don't have a great resell value
Why bothering :  i don't want to have another wheel set sitting in the garage  ,
                          for the glory of lacing a wheel by my self ?
                          for the same reason  i purchased a chiner bike and assmbled it  

based on all your comments , i'm not sure to move forward with this project, still interesting discussion.

stupid comment : it's a botch that can end with death => Only if i use brakes   

Hi all
I recently changed bike from a rim brake to a disc brake.
I'm wondering if i can transform my elitewheels PRO rim brakes 38mm deep to disc brakes?
i understand that i would need to rebuil the wheel with new hubs and new spoke , but would the rim be compatible ?
thanks a lot for your advices
Nicoloc

any suggestion on the ALi market  ?

Any specific exemple?
All thé ones i looked at (but the gravel ones )didn't have any flare.
Thanks

Hi guys
I'm looking for a 4°flare handle bike for my road bike.
My only constraint is that it need to have round tube (no aero design).
Thanks
Nicoloc

Hi
I've seen a compatible 3d file for 3d printing of light carbon spacers that look the sames.
Can't remember the website but you lay find on Google

Hi all,
Any feedback on go zone ?
I can't find build using those wheels.

hi guys,
for those who wants to compare and see what the P505 data looks like. here are two fit files from the same workout in Zwift (ATTAC).
One from the Magene P505 and the other one from the TACX.

Hi all some feedback on the P505 magene powermeter.
Data provided  looks weird to me with lot of variation from one second to another.
i'm comparing the data with my TACX FLux and even if average  power seems to be consistent, the variation in values make no sence.
I contacted Magene support and from their prospective (after sharing some compartive fit file)  , everything is normal...
so my point is that i cant recommend this power meter and as mention in some other post Magene support was useless.
Nicoloc

Looks intersting
do you have any experience with the tubolito or ride now tubes?
how do they perform against puncture?
do they hold pressure well ?
i've read mixed feedback on various forum so i havent pulled the trigger yet....

looks like i found the guilty componment :  Fonvo ring...
the ring as a design that is not compatible with the Mangene.
I had to grind off some 52 ring rear ribs that were interfeering with the powermeter ring mount (see attachements)
I'll have to check but it lookslike this shaved 2mm and the ring is now spining round.
i'll double check once reassembled on the bike.

hi guys
I finally received my magene P505 110-3.
I assembled it on my CVR Hardrock cranckset with a set of 52/36 Fonvo Deckas chain ring.
the combo chain ring + powermeter is larger than the original chain ring of the crankset, so i had to adjust the front derailleur top end  screw.
but this led to front derailleur to rub against crank arm

any idea on how to solve that  ?
if i have to change the crank, any suggestion ? what would be the caractéristic to look at ? Q factor ?
thanks for your help
Nicoloc