Quote from: CycOps on June 22, 2026, 04:14:41 AM
FM336 has normal road standart, 12x100 at the front and 12x142 at the rear.

thanks, at least the rep from serenade saw my mistake before sending me boost wheelset

Hi guys, I have some doubt, what is the standard for the hub in this frame ? boost ? thanks

thanks ok that what I got too =) never saw that, this is my first integrated cockpit

And does anybody has inspected his frame and saw a splint in the carbon around the rivnut

Quote from: FTR on June 18, 2026, 07:33:39 AM
Also wanted to post my work in progress.
This will be a multi-use bike, so with gravel wheels for offroad use and road wheels for road use.
Since no-one posted this yet, I figured I'd post a pic with the 28mm tires to show how it looks with road tires!

Colour is a specific Pantone I requested, looks nice but the paint does seem to chip easily if you're not that careful while installing...

More pics and specs will follow when finished, also still waiting for the gravelwheels which are lost in shipping 

hello
do you had the same spacer and compress ring as I have ? like the one shown in my previous post ?
thanks

Hey I received my frame today, but I do not have you 3 and 4 spacer.
Mine are totally different, even the compression ring, both are in aluminium and they have pin on top, so i can only fit the mondince handlebar with hole matching the pin. 

Maybe Jack forgot something for my headset and seal.

He forgot to send me the trap door of the fram 

Quote from: Zrader on June 13, 2026, 10:21:51 AM
I guess it depends on your brake caliper system. Most nowadays come with the ability to have both 160 and 180 mm rotors by flipping the bracket one direction for 160 mm and the other way for 180 mm.

aahhh make sense thanks for the picture. OK so the frame is shipped with an adapter bracket that we can flip ^^

Quote from: Zrader on June 11, 2026, 06:12:37 PM
No adapter is necessary for 160 or 180cm brakes

thanks but i dont understand how is this possible ? if 160mm is native on the frame and fork then we need 20mm adapter for 180mm ?

Hello  my frame should arrive in the coming days 

I want to order the last part, the disc brake. Did you guys had to use an adaptator to mount 160mm disc ? thanks

Quote from: MF_one on May 28, 2026, 04:45:48 PM
I also attached the measurement of inner fork width and rear clearance in frame.

Not super accurate measurements, but I hope it helps

Hello mf, thanks for your measurement.
Did you order the fork without rivets ? the order went fine ?

Quote from: Spongel on May 08, 2026, 02:28:26 PM
What are your body measurements? Like inseam length, arm length and body height?

i am literraly the opposite of you ! a real monkey... 179cm with 192cm span and short leg 83cm inseam. I need a M with extra long stem xD

I just ordered my frame, 615€ with shipping and handlebar.

I will go for L also, more seatpost out = more flex and confort, you can have some spacer and as you get more fit and more flexible you will slam the stem and be faaast and sexy

I dont understand the super short reach even in size L its shorter than most medium frame.
Its a pain to find a frame for monkey arms like  me with normal inseam... +13cm ape index ahha

damn almost same geo as the FM336 but with 57 tire clearance ! and lighter than the fm336, i was set on the mondince but why would not chose the spcycle ? anything in mind ? 

Hello guys I am ordering the frame.
And all the pieces for my build.

For the crankset I am going with sram red.

Should I go sram red classic or sram red wide?

I rather have the thinnest q factor but so the frame fit the classic?

Thanks

Thanks Lama, do you think they will release a new model or update the firmware ?

And guys do you know if a stantard red dub crank is compatible with this powermeter ?
thanks