Quote from: patliean1 on March 13, 2024, 09:57:37 PM
Wicked @rga19071976 !

Assuming your paint color is silver chameleon, my frameset was shipped out yesterday in the same color. Hoping it delivers by end of March. I'm gonna be blinding mofos when the sun hits 

Right, that's the color. It's a blinding machine 

Good night

After 500 km with the bike, I can say that I am very satisfied.
I leave some photos of the final assembly

Quote from: Thegoods on March 06, 2024, 05:51:24 PM
My rear axle does not fit the threads well at all. Almost feels as if it's cross threaded initially even though it's not. I got a Robert axle mavic replacement and it won't thread into it it all. It's supposed to be a direct replacement for mavic speed release, but it will not thread and I don't want to force it and strip something. Does anyone's rear axles thread smoothly?

Good afternoon: For my part, no problem in that matter.
The only thing about the entire assembly that is giving me any problems is the issue of anchoring the saddle. I had an Elita One carbon saddle installed but it was giving me some discomfort so I changed it for a Prologue Scrath M5 with round rails. I have tightened it to 15N and even today when I went over a bump it moved a little. It occurred to me to use blue Loctite applied to the entire area and see how it goes.

THE SAME THING HAPPENED TO ME. I SPREAD EVERYTHING WITH CARBON FIBER PASTE AND TIGHTEN UP TO 17 NEWTONS BUT THE THREAD WAS DAMAGED.
THEN I REALIZED THAT THE PARTS AND THAT AREA OF THE POST ARE MADE OF ALUMINUM SO I REMOVED ALL THE PASTE, CLEANED IT WITH DEGREASER AND TIGHTENED IT AGAIN WITH ANOTHER PROVISIONAL SCREW TO 15 NEWTONS. AT THE MOMENT THE SADDLE HAS NOT BEEN LOOSENED AGAIN, I HAVE ALSO ORDERED THE TITANIUM SCREW. REALLY ALL THE HARDWARE THEY SEND IS OF VERY POOR QUALITY.

Quote from: antimeride on February 15, 2024, 05:57:46 PM
Using the rough schematic from velobuild's website, I modeled the integrated handlebar in order to get the real reach measurement. I guessed on the stack of the headtube cover, would be much appreciated if anyone could provide an accurate measurement.

GOOD MORNING

IF YOU REFER TO THIS PIECE, IT MEASURES 14 MILLIMETERS

No hurries

Good afternoon:

I am new to the forum and on January 8th I ordered the frame in chameleon silver color size S. Yesterday it arrived correctly packaged.
What I didn't get in the package is the cycle computer holder and the extra rear hanger, but they have already told me by email that they will send it to me tomorrow.
I must say that the paint is spectacular, it only has a small bubble on the back that will not be difficult to fix by lightly polishing.
I also have to go over the steering bearing seats and bottom bracket seats with very fine sandpaper.

Waiting to start assembly, happy with the order.