VeloBuild VB-R-268 frame

[Deanoden]

I had the same issue.  To get it to work I sort of retreaded the frame by taking the through axle and forcing it in from the outside and then running it in and out a few time.  VB has a flaw somewhere on this part of the frame. 

[Easyfunk]

I had the same issue.  To get it to work I sort of retreaded the frame by taking the through axle and forcing it in from the outside and then running it in and out a few time.  VB has a flaw somewhere on this part of the frame.

I did exactly the same. Velobuild agreed to send me a replacement insert, but I did not receive it yet.

[hazzer19]

My rear axle does not fit the threads well at all. Almost feels as if it’s cross threaded initially even though it’s not. I got a Robert axle mavic replacement and it won’t thread into it it all. It’s supposed to be a direct replacement for mavic speed release, but it will not thread and I don’t want to force it and strip something. Does anyone’s rear axles thread smoothly?

No issues with this for me and I have used two different sets of VB rear axles and RD hangers.

[rga19071976@gmail.com]

My rear axle does not fit the threads well at all. Almost feels as if it’s cross threaded initially even though it’s not. I got a Robert axle mavic replacement and it won’t thread into it it all. It’s supposed to be a direct replacement for mavic speed release, but it will not thread and I don’t want to force it and strip something. Does anyone’s rear axles thread smoothly?

Good afternoon: For my part, no problem in that matter.
The only thing about the entire assembly that is giving me any problems is the issue of anchoring the saddle. I had an Elita One carbon saddle installed but it was giving me some discomfort so I changed it for a Prologue Scrath M5 with round rails. I have tightened it to 15N and even today when I went over a bump it moved a little. It occurred to me to use blue Loctite applied to the entire area and see how it goes.

[hubertus]

Just ordered this frame to do a build for my girlfriend.

Velobuild 268 (in glossy pearl white, because of the incredible pictures shared earlier)
Complete Shimano 105 mechanical 12 speed groupset
Elitewheels ENT disc 38mm x 28mm wheels
GP5000 28mm
TPU inner tubes

Quick question: only part lacking is finding a saddle. Any (scientific / structured) approach on finding one for her?

[cramy]

Just ordered this frame to do a build for my girlfriend.

Velobuild 268 (in glossy pearl white, because of the incredible pictures shared earlier)
Complete Shimano 105 mechanical 12 speed groupset
Elitewheels ENT disc 38mm x 28mm wheels
GP5000 28mm
TPU inner tubes

Quick question: only part lacking is finding a saddle. Any (scientific / structured) approach on finding one for her?

maybe check the ryet aircode 3d.
https://fr.aliexpress.com/item/1005005209973776.html?spm=a2g0o.detail.0.0.1391J7XXJ7XXnu&mp=1&gatewayAdapt=glo2fra

[jcr]

Complete Shimano 105 mechanical 12 speed groupset

Will be interested to hear your experience on routing on this bike

[Cnasta]

Just ordered this frame to do a build for my girlfriend.

Velobuild 268 (in glossy pearl white, because of the incredible pictures shared earlier)
Complete Shimano 105 mechanical 12 speed groupset
Elitewheels ENT disc 38mm x 28mm wheels
GP5000 28mm
TPU inner tubes

Quick question: only part lacking is finding a saddle. Any (scientific / structured) approach on finding one for her?

I'd love to see some (or: a lot) pictures of that frame/color. Thinking about the same color Allready sourced a Ultegra 11sp di2 groupset 2nd hand. Would make a killer bike I think (this or the Ican A40)

[hubertus]

I will definitely circle back the pictures, and can provide details on the build process. Especially on the topic of going mechanical this time.

[rga19071976@gmail.com]

Good night

After 500 km with the bike, I can say that I am very satisfied.
I leave some photos of the final assembly

[patliean1]

Wicked @rga19071976 !

Assuming your paint color is silver chameleon, my frameset was shipped out yesterday in the same color. Hoping it delivers by end of March. I'm gonna be blinding mofos when the sun hits 

[rga19071976@gmail.com]

Wicked @rga19071976 !

Assuming your paint color is silver chameleon, my frameset was shipped out yesterday in the same color. Hoping it delivers by end of March. I'm gonna be blinding mofos when the sun hits 

Right, that's the color. It's a blinding machine 

[RasmusWH]

Hi!
Fairly close to pulling the trigger on the 268. Does anyone know if the expander plug and compression ring design is identical to the recalled one on the SL7?

[joegal]

Hi!
Fairly close to pulling the trigger on the 268. Does anyone know if the expander plug and compression ring design is identical to the recalled one on the SL7?

No, its velobuilds own design. (if that's a good or a bad thing, that's up for you to judge. I used a Deda 70mm Expander and a modified compression ring from the SL8 on my VB)

[RasmusWH]

No, its velobuilds own design. (if that's a good or a bad thing, that's up for you to judge. I used a Deda 70mm Expander and a modified compression ring from the SL8 on my VB)

Thanks, so the new plastic/injection moulded compression ring for the SL8 fits in the 268?