Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - asarkany

Pages: [1]
1
Cyclocross Frames, Wheels & Components / Re: Wheeltop EDS GeX
« on: May 27, 2025, 03:29:41 AM »
IIRC the default position is already as close as they can get. You can only get them further away from the handlebars. At least that's what i've heard. Given how small the shifters are the lever reach seems rather high unfortunately.

Yes, just checked and it is at its closest position. Bummer. I have an other bike with GRX600 at home, and that at is furthest position is still one cm closer to the handlebar than the gex with its closest. The grx set to its closest is almost 3 cm closer, so there is way more range there. Honestly I fail to see why would anyone need higher lever reach than the closest on the GeX, so seems like a weird range to me.

2
Cyclocross Frames, Wheels & Components / Re: Wheeltop EDS GeX
« on: May 26, 2025, 08:48:15 AM »
Is it possible to adjust lever reach? I find that the levers are too far from the handlebar for my taste

3
Cyclocross Frames, Wheels & Components / Re: Wheeltop EDS GeX
« on: April 17, 2025, 12:30:50 PM »
Finally received mine as well, and was able to go to a ride today. Setup experience is not the best, the shifter cover is ridiculously hard and the explanations in the manual/app not really helpful, but with the help of forum posts and youtube videos I was able to set it up perfectly, though I did have to play around with the fine tuning a bit. Braking performance and shifting is really good. The hoods feel comically small, not necessarily bad, but definitely something that I need to get used to.(and my hands are not exactly big) Overall I really like it, especially that I was able to get it from aliexpress around 410 euros.

4
Cyclocross Frames, Wheels & Components / Re: Wheeltop EDS GeX
« on: March 17, 2025, 09:43:20 AM »
I am using a tariffless shipping line where the import taxes are prepaid, they are included in the shipping price i mentioned. So the 392€ should be the final price. If that turns out to be wrong i will update it here but i used this shipping line for other things before and never had to pay any taxes when it was delivered.

That actually sounds really good!

5
Cyclocross Frames, Wheels & Components / Re: Wheeltop EDS GeX
« on: March 17, 2025, 09:28:54 AM »
The groupset is packed and shipped out now. The whole shipping, packaging etc. comes out to 47€. In addition to the 345€ i've paid so far i am at 392€ for the whole groupset. I could have optimized a little further by not shipping the whole packaging etc. but i didn't want the groupset to get damaged in transit.

I guess import taxes depend on luck and not included in this price, right? I bought mine on aliexpress, that after coupons(there is almost always a sale going on, now you can get it for 447 usd which is 409 eur)was 460$ which is 421 eur. A little bit more I guess, but thats fine(whether I will get taxes or not I don't know, the package is in europe but I have not received it yet). In my opinion 500 euros should be the price of the gex from the official store, otherwise as a new build it doesn't make sense to go with the gex for 600 euros when you can get an apex xplr groupset with a chain and cassette for 700 euros from bike-discount.de

6
Cyclocross Frames, Wheels & Components / Re: Wheeltop EDS GeX
« on: March 12, 2025, 02:45:54 AM »
In there any disadvantage to the long cage version, other than a bit of bulk?

I'm still torn on gearing. The 10-50t range with a 40t crank gives a great range, but I'm not sure about the 10t cog.

There's also a SRAM 12 spped, 11-44t available, bit narrower range mainly on the high end (11t), but the gaps are a bit smaller too, in the important flat ground 25-35km/h range.

Will the 10-50t be more fiddly and hard to calibrate? Any advice or thoughts? I'm a fairly fast rider but I do want to hang on to a low gear below 1:1 ratio for steep climbs. 40 front 44 back is about as high as I want there.

According to wheeltop, no. I asked the same from them, and this was their answer: As long as the cassette size is within the 10-52t range, our product will be compatible and can be used without any issues.


7
Cyclocross Frames, Wheels & Components / Re: Wheeltop EDS GeX
« on: March 03, 2025, 11:00:58 AM »
Help with gearing?

I'm confused by Wheeltop saying minimum cog "10-11t". Does that mean 10t may have issues? Anyone with specific experience?

I'd like to get the additional occasional speed of 10t based on my browing of gear calculator. The 10t-45t shimano cassettes look good to me (even though I need microspline wheels), or there are 10-46t XD cassettes.

Better to be safe and stick with 11t?

I asked a similar question from wheeltop and they said that 10-44, 10-45 is absolutely fine, they had compatibility issues on some frames with 10-52 but not with 11-52. So I guess it is more of a capacity thing on the extreme ends, but you should be good with 10-45 according to them.

8
Cyclocross Frames, Wheels & Components / Re: Wheeltop EDS GeX
« on: February 26, 2025, 02:51:55 AM »
https://www.cingolanibikeshop.com/cambio-sram-rival-etap-axs-d1-xplr-12v-gabbia-media-senza-batteria.html

But the lever bundle i took is not available anymore to be honest it could have be a one time sale

Thank you, yeah that bundle seems to be gone. However apex axs xplr groupset is readily available for 700 euros that includes a cassette and a chain as well, and from what I read apart from the paint virtually there is no difference between rival and apex. I joined the wheeltop fb group and there seems to be a lot of people not happy with their groupset(especially the app), so I think I will go with the apex for basically the same amount of money.

9
Cyclocross Frames, Wheels & Components / Re: Wheeltop EDS GeX
« on: February 19, 2025, 07:45:25 AM »
I don’t understand what’s the point with wheeltop gx, it comes for 600€ in EU, I just bought a sram rival axs 1x12 for 580€, same components. Yes the GX supports more gears and larger sprockets (…and I don’t care) but rival works very well out of the box, it’s reliable, waterproof and thoroughly tested. Should not wheeltop reduce prices?

Where did you buy it from for that price? I am looking for groupsets, and kinda set on the gex, and I can't seem to find a rival axs for that low anywhere, not even on ebay, etc.

Pages: [1]