How about a endurance version of the frame LCR-018? Should have a higher stack to begin with...

Maybe. But honestly I think I'll go for it in size 52 and do some mobility work off the bike to get rid of the spacers. I'm too invested in this frame now.

Hello I have the 7x7 saddle clamp but would like to try out some of the 3d carbon saddles.

Does anyone know wether this clamp is compatible? https://de.aliexpress.com/item/1005008649781170.html

Try this one too: https://it.aliexpress.com/item/1005007980505648.html

Hi,
So its finally arrived and I spent 2 days building it up.  The 49cm size, 20mm offset and 100mm x 380mm handlebar fits spot on.!
I took it out for an initial 45min ride and it felt nice.  Smooth, responsive and agile enough.  I will take it out during the week for a much longer ride and see how it goes.
Frame weight 928grams, seat post 187grams, handlerbar 320grams, fork 418grams.  With everything installed it weighs 8.1kg.  But I can get it lower if I swap out to nicer carbon wheelset.

Great build! How many headset spacers are you running under the stem? And do you plan to remove any once you've dialed in the fit after a few longer rides?

Quote from: Rada on June 29, 2026, 09:49:55 AM
Great build! How many headset spacers are you running under the stem? And do you plan to remove any once you've dialed in the fit after a few longer rides?

I used all the 5 spacers provided. Yes I may remove to feel more aero if needed 

Quote from: jmly14 on June 29, 2026, 07:49:28 AM
Hi,
So its finally arrived and I spent 2 days building it up.  The 49cm size, 20mm offset and 100mm x 380mm handlebar fits spot on.!
I took it out for an initial 45min ride and it felt nice.  Smooth, responsive and agile enough.  I will take it out during the week for a much longer ride and see how it goes.
Frame weight 928grams, seat post 187grams, handlerbar 320grams, fork 418grams.  With everything installed it weighs 8.1kg.  But I can get it lower if I swap out to nicer carbon wheelset.

I don't know if it was due to frame problems or UCI certification but probably LC reinforced the frame my wheight for Size 52 frame purchased at the end of 2024 is :

Frame weight 844grams, seat post 150grams, handelbar 352grams, fork 383grams only the handelbar it's heavier because is the previous version.

1853 the new size 49 vs 1729 the old size 52 ?

Oh really. Weight difference of 100+ grams. I was surprised and slightly sad that the frame weight was not really what was printed on their website. 

Quote from: jmly14 on July 07, 2026, 06:32:08 AM
Oh really. Weight difference of 100+ grams. I was surprised and slightly sad that the frame weight was not really what was printed on their website.

The site give:

fork, 390g+-15g         28
frame 870g/52cm +-30g   58      850g/49cm   78
seatpost 160+-10g       17
handlerbar 300g         20

but is the same from 2024.

Quote from: vanleapo on May 07, 2026, 09:28:21 AM
I can confirm they have updated the rear derailleur hanger on the LCR017-D. I received my new frame in mid April.
I wasn't sure about it when I first fitted it, but the rear wheel goes into position easily and the gear changes are sharp with my SRAM Red derailleur

Hmm i recieved frame today and am also unsure enough to message LC! But after seeing your post i guess it's right. weird it doesn't "fit" in. I also noticed some air gap, is it normal?

I assume that tooth is to catch the chain but the gap...

Hey guys,

Quick question about the seatpost for this frame, is it proprietary to this bike, or are there any aftermarket/third-party posts that'll actually fit it?

I'm trying to swap to a 0mm offset, but the official stock post with shipping is way too expensive. Anyone know of a solid, cheaper option that works, or are we stuck with the OEM one?

Quote from: Dave2041 on August 10, 2026, 03:08:02 PM
Hmm i recieved frame today and am also unsure enough to message LC! But after seeing your post i guess it's right. weird it doesn't "fit" in. I also noticed some air gap, is it normal?

I assume that tooth is to catch the chain but the gap...

they updated to UDH. which is a good thing. there should not be a gap like this

Quote from: Dave2041 on August 10, 2026, 03:08:02 PM
Hmm i recieved frame today and am also unsure enough to message LC! But after seeing your post i guess it's right. weird it doesn't "fit" in. I also noticed some air gap, is it normal?

I assume that tooth is to catch the chain but the gap...

Did you figure out how to get rid of the gap?

Hey, guys. Could you please let me know if anyone ordered a frame in 2026 and how much it cost you, including shipping, so I can get a rough idea of the price?