SPCycle TT928 build

Started by Ludo, November 04, 2026, 10:29:08 AM

Previous topic - Next topic

Ludo

SPCycle TT928
TT/Tri
Frame
SPCycle TT928
Frame Size
M
Year
2026
Groupset
SRAM AXS 12s
Crankset
Magene TEO 50T
Cassette
ZTTO 11-32T
Brakes
IIIPro
Wheels
Ali no names Goldix R180SL hubs, 5.2mm carbon spokes
Wheel Size
700*80mm
Tires
700x30C
Cockpit
400x90mm
Saddle
Riro TT
Pedals
Bucklos carbon/titanium KEO
Weight
10 kg
Approx. Build Cost
~2,500 USD
Starting build thread here, ordered all the bits and pieces the last couple of days, frame is supposed to show up mid December,
Finalizing the paint design with them (3 colors). It's my 4th bik build, 3rd on SPcycle frame and first TT bike. Objective is to be ready for Galveston 27' 70.3 on April 4th.

the build:
frame
https://www.aliexpress.us/item/3256811533568249.html
wheels
https://www.aliexpress.us/item/3256812739909947.html
tires
https://www.bike24.com/p2581542.html?origin=SRP
crankset
https://www.aliexpress.us/item/3256810022842140.html
chainring
https://www.aliexpress.us/item/3256811381915263.html
pedals
https://www.aliexpress.us/item/3256811903096017.html
BB
https://www.aliexpress.us/item/3256811442093036.html
derailleur
used SRAM rival AXS 12s
shifters
https://www.bike24.com/p2704143.html
cassette
https://www.aliexpress.us/item/3256808949928314.html
chain
https://www.aliexpress.us/item/3256809968964829.html
brakes
https://www.amazon.com/IIIPRO-Hydraulic-2-Piston-Bearings-Compatible/dp/B0GSGHRYTQ
rotors
https://www.aliexpress.us/item/3256809682121882.html
saddle
https://www.aliexpress.us/item/3256812751856419.html

Full on Chiner build

teichs42

Very much looking forward to seeing an actual build of this! What made you go with this frame?

Ludo

Quote from: teichs42 on November 04, 2026, 10:42:26 AMVery much looking forward to seeing an actual build of this! What made you go with this frame?
Honestly, budget and comfort with the brand as I had 2 other frames from them, frame design too. I am not elite so 5W of aero gain at 45km/h don't matter to me.
With sales, coupon and rakuten cash back I am at $1000 on the frameset, hard to beat.

Ludo

Anyone has a suggestion for computer mount? SPCycle doesn't have one (why not develop one and make an extra 15-20$ per sale?!)

Gloopann

I could be down to make a 3D model for printing if you can provide accurate measurements.

Ludo

Yes taking measurement is in my skill set, i think :)

Ludo

Updated picture with rendering, it's going to be a few long weeks waiting for this frame!
Parts are slowly rolling in.

Bretzna

I assembled two TT928 frames from Tantan in September. I had the TT912 before that. Personally, I found the TT912 easier to assemble, especially when it came to the fork. You have to cut the TT928 fork down to a fairly short length. It creaks a lot, and there's not much clamping surface. You have to attach the Sapacerturm to the base before you secure the base to the fork; otherwise, you won't be able to thread the long screws through from below. I think that's a design flaw, too.
The worst part is the cover for basebar-fork clamp area. The mounts don't work at all for me—on both bikes. The design is really bad. There's just a small clamping tab, and that's it. I haven't found a solution yet for how best to handle this. I'm curious if you're having the same issue.

A BTA system would be really cool. And a tool box for the frame triangle.I haven't found one yet and my cad skills are very limited:D.

Ludo