Hello

Building my velobuild wb-r099 shimano 105 hydraulic groupset and have problems with cable routing in handlebar. Automatically turns in one direction
I want to position front brake and rear shifter on right side handlebar.
What is right position for cables? Tnx for helping.

Some pictures...

https://ibb.co/YtKCR3T
https://ibb.co/rwbHvhj
https://ibb.co/PGHPMGC

Could someone draw me which is the best way to line front and rear hydraulic wire trough front fork and handlebar?

Your routing through the handlebars is fine. You'll have to cross your brake lines, but do it after they go through the top headset bearing and the space in the lock ring so that your 2 brake lines and 2 cable housings run parallel through the lock ring in the same orientation as they are through the handlebars. You should be able to cross the brake lines in front of the steerer down the front of the headtube.

That is mine...
https://ibb.co/ckct6xV

Quote from: Ogi22 on November 30, 2021, 07:50:31 AM
That is mine...
https://ibb.co/ckct6xV

Idk if i understand... u have any pics?

Sorry, I don't have any pictures at the moment. My bike is currently disassembled. In your original post, you said you wanted to position your front brake hose and rear derailleur cable on your right shifter. Your last picture shows your front brake on the left shifter. Looks fine through the handlebars and stem. Your front brake line and front derailleur cable shouldn't have to cross each other at all though.

Could you explain what you mean by saying automatically turns in one direction?

Yea sorry i will made in normal posittion... front brake, front shifter on left...

Quote from: Ogi22 on November 30, 2021, 03:40:21 PM
Yea sorry i will made in normal posittion... front brake, front shifter on left...

Have you completed your builds and your cable runs?
What was your final setup? Front brake and front derealluier on the left and Rear brake and Rear derealluier on the right? ?