Hey guys,

For the front thru-axle, I feel like the one that came with my frame might not be correct. Its the right size but the I'm not sure about the where the bolt head contacts the fork.

Basically it sits flush on the outside of the fork, directly on the carbon. However, it has grip serrations on the bottom of it so if you twist it in it basically grinds the paint off and maybe eventually the carbon? Is this correct or should I ask/buy a different thru axle.

Quote from: jr223 on January 19, 2023, 09:43:10 AM
Hey guys,

For the front thru-axle, I feel like the one that came with my frame might not be correct. Its the right size but the I'm not sure about the where the bolt head contacts the fork.

Basically it sits flush on the outside of the fork, directly on the carbon. However, it has grip serrations on the bottom of it so if you twist it in it basically grinds the paint off and maybe eventually the carbon? Is this correct or should I ask/buy a different thru axle.

Have you got a photo?

Quote from: memebike on January 20, 2023, 07:50:15 AM
Have you got a photo?

Here it is

That area should be faced so I wouldn't worry too much about it.

Quote from: jr223 on January 20, 2023, 10:34:19 AM
Here it is

Can confirm mine looked like that also, shouldve been faced but wasnt worried about it. the paint has flaked where the bolt head sits but is only noticeable when the thru axle is removed.

Thanks guys! New to this so I appreciate the help.

After some luking and reading all the thread... Finally order a 168.

It will be dress with Rival/Force AXS bits and probably a Ryet 40mm wheelset.

I hope to be on the 8kg edge... Let's see!

Quote from: theo__ on February 01, 2023, 02:15:53 PM
After some luking and reading all the thread... Finally order a 168.

It will be dress with Rival/Force AXS bits and probably a Ryet 40mm wheelset.

I hope to be on the 8kg edge... Let's see!

Similar setup to me! Force/Rival defintely seems to be the sweet spot right now price wise.

I don't want to go through all the posts again, I'm just considering whether to order the set with a separate stem and handlebars...

Did any of you manage to integrate the parts supplied by Velobuild with hydraulic brakes and mechanical shifters without causing problems?

Quote from: planet_sammy on February 03, 2023, 07:36:42 AM
I don't want to go through all the posts again, I'm just considering whether to order the set with a separate stem and handlebars...

Did any of you manage to integrate the parts supplied by Velobuild with hydraulic brakes and mechanical shifters without causing problems?

LoL yes.

Quote from: planet_sammy on February 03, 2023, 07:36:42 AM
I don't want to go through all the posts again, I'm just considering whether to order the set with a separate stem and handlebars...

Did any of you manage to integrate the parts supplied by Velobuild with hydraulic brakes and mechanical shifters without causing problems?

I used their integrated headset. From what I can gather they've made improvements and the headset play typically isn't an issue anymore.

I ran the SRAM HRD lines through it fine, but if you were doing mechanical shifting + hydraulic brakes I think it would be very very tight.

Quote from: patliean1 on February 03, 2023, 07:54:54 AM
LoL yes.

Yes, but with FSA components, right?

Quote from: planet_sammy on February 03, 2023, 08:12:38 AM
Yes, but with FSA components, right?

I first built my VeloBuild frames using VB's separate bar and stem combo. Routing 4 cables through the stem and headtube was tight but not impossible. Having the proper tools helps a lot. I only later switched to the FSA no.69 system because I needed the modularity to easily switch stems.

I'm collecting parts... I have a doubt.


Edit: I find 140mm rear on bike posted.

Has anyone been as cheeky as to ask Velobuild to replicate a paint scheme directly from Specialized?

I've been emailing with Chris and he's confident that they would be able to do a glossy-to-matte finish ala Red Tint - Black Satin (picture provided).

Have any of you ordered the 168 (or any VB) with a transition like that?

Cheers!